Hi All,
I am trying to get set up for FSK with my FT-1000MP using a Rig Blaster Pro.
It will work in AFSK but then I can't use my good filters and there is also
the issue of overdriving in AFSK. So I want FSK.
Right now it's fine with sound card modes. I see what I need for a cable
for the FSK connection and have the parts.
But from what I am reading the PTT has to come from the serial port to the
RB. Right now the only serial port I have is doing the rig control which I
sure don't want to give up.
I do have 2 USB ports and one goes to my WinKeyer which I could unplug while
using RTTY. And I have a USB to Serial device that works fine for rig
control.
So is my only option to use both the serial port and USB to get rig control
to the MP and PTT to the RB? Can I get the PTT from that USB port via the
adaptor to the RB?
Or is there some easier way to do it.
Thanks,
OK, back in my hole,
Ron, KU7Y
SOWP 5545M
Arizona Outlaws Contest Club
Brenda, AZ (Winter)
Caldwell, ID (Summer)
ku7y@qsl.net
http://www.hatpinsandmore.com
_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty
|