What MMTTY profile are you using when you run the comparison?
-----Original Message-----
From: Bill, W6WRT
Sent: Monday, September 17, 2012 6:49 PM
To: RTTY Reflector
Subject: Re: [RTTY] AFSK to FSK converter
ORIGINAL MESSAGE:
On Mon, 17 Sep 2012 21:20:48 -0000, Rex wrote:
HEY GUYS
When you guys get this 2Tone thing all figured out so it works with FSK
and N1MM then I'll try it again, All I get now is a continious tone.
I don't understand any of this ""OOK"" or such stuff.
Rex
REPLY:
Got it figured out thanks to VE3KI.
Here's the trick (only works with N1MM)
Use two DI windows. Make the first one your regular MMTTY window and make
the
second the 2Tone window. The second DI window is receive only, but that's
ok.
You get the full benefit of a superior decoder and you can click on call
signs
etc as always. I have been testing it our this morning and it works very
well
(an understatement). 2Tone is clearly superior to MMTTY at digging weak
signals
out of the noise. Try it, you'll like it.
The only drawback so far is the second DI window does not populate the GRAB
box.
Not really a problem, you just click on the call instead of GRABing.
"OOK" means On Off Keying, i.e. like CW - the keying signal is either there
or
it's not. Nothing in between.
73, Bill W6WRT
_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty
-----
No virus found in this message.
Checked by AVG - www.avg.com
Version: 2012.0.2221 / Virus Database: 2437/5273 - Release Date: 09/17/12
_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty
|