I have always homebrewed my own interface.
I built my first TU in the early 1960's using a 2in CRT and a XR2206/2211
chipset and re-purposed telephone coils. Its still functional.
My current interface includes a $0.99 USB sound card and a $5.95 USB2Serial
adapter.
Two single transistor circuits take care of the PTT and FSK.
There are many ways to achieve the final result. It all depends on your
pocketbook and how fancy you want to get.
73s de Jim
W5IFP
> -----Original Message-----
> From: RTTY [mailto:rtty-bounces@contesting.com]On Behalf Of Jim W7RY
> Sent: Tuesday, October 16, 2012 11:05 PM
> To: Gary AL9A; 'RTTY Reflector'
> Subject: Re: [RTTY] Icom FSK interface
>
>
> My Icom IC-7600 has built in sound card (so does my IC-7200)... An
> opto-isolator and a resistor took care of the FSK.
>
> 73
> Jim W7RY
>
>
> -----Original Message-----
> From: Gary AL9A
> Sent: Tuesday, October 16, 2012 8:33 PM
> To: 'RTTY Reflector'
> Subject: Re: [RTTY] Icom FSK interface
>
> The microHAM microKEYER II not only does FSK, but also has a built in
> soundcard that can do AFSK and SSB DVK as well as an on board
> Winkey keyer. Great device and I highly recommend it!
>
> 73,
> Gary AL9A
>
> ----- Original Message -----
> From: "Don Hill AA5AU" <aa5au@bellsouth.net>
> To: "'RTTY Reflector'" <rtty@contesting.com>
> Sent: October 16, 2012 4:02 PM
> Subject: Re: [RTTY] Icom FSK interface
>
>
> > Specifically, the page for the homebrew transistor circuits are here:
> >
> > http://www.aa5au.com/rttyinterface.html
> >
> > Sounds like your friend is looking for a commercial interface
> that does
> > FSK. Sorry but I don't know of any suggestions. I don't know
> > if the Signalink does FSK or not.
> >
> > 73, Don
> >
> > -----Original Message-----
> > From: RTTY [mailto:rtty-bounces@contesting.com] On Behalf Of Ed Muns
> > Sent: Tuesday, October 16, 2012 6:19 AM
> > To: 'Dick Kriss'
> > Cc: 'RTTY Reflector'
> > Subject: Re: [RTTY] Icom FSK interface
> >
> > www.rttycontesting.com shows a simple homebrew FSK/PTT interface and
> > references some commercial interfaces. There are many choices.
> > For a more comprehensive discussion, including an interface
> comparison
> > chart, see the RTTY Contesting column in the May/June 2012
> > issue of NCJ, page 41.
> >
> > Ed W0YK
> >
> >
> >
> > Dick AA5VU wrote:
> >> A ham friend called last night he wants to get on RTTY with a PC and
> >> an Icom IC-756 Pro III and he plans to use FSK. He wanted to know if
> >> there was an inexpensive interface device to handle the connections
> >> between the PC and the Pro III.
> >>
> >> As a Mac user I only use AFSK and could not help him. The SignaLink
> >> USB is good for AFSK but does not support FSK. How do FSK users
> >> handle the connections between the PC and and Icom?
> >>
> >> I referred him to AA5AU's web page and he did not see any mention of
> >> using something like the SignaLink for FSK.
> >
> > _______________________________________________
> > RTTY mailing list
> > RTTY@contesting.com
> > http://lists.contesting.com/mailman/listinfo/rtty
> >
> > _______________________________________________
> > RTTY mailing list
> > RTTY@contesting.com
> > http://lists.contesting.com/mailman/listinfo/rtty
>
> _______________________________________________
> RTTY mailing list
> RTTY@contesting.com
> http://lists.contesting.com/mailman/listinfo/rtty
>
> _______________________________________________
> RTTY mailing list
> RTTY@contesting.com
> http://lists.contesting.com/mailman/listinfo/rtty
_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty
|