Al,
Thanks for the SignaLink USB Mod for FSK. I will pass it along. Interesting
the link shows it
interfaced to IC-7700
Dick AA5VU
On Oct 16, 2012, at 10:00 AM, Al Kozakiewicz <akozak@hourglass.com> wrote:
> http://www.k7sfn.com/projects/signalink.html
>
> If you have an Icom radio and are starting with a Signallink as your sound
> card interface, this simple and clever modification to the device basically
> brings out the FSK keying pins from the accessory cable to a jack on the
> Signallink. From there, it's a standard FSK interface (i.e. transistor
> switch) to a standard serial port.
>
> Al
> AB2ZY
>
> ________________________________________
> From: RTTY [rtty-bounces@contesting.com] On Behalf Of Dick Kriss
> [aa5vu@att.net]
> Sent: Tuesday, October 16, 2012 6:02 AM
> To: RTTY Reflector
> Subject: [RTTY] Icom FSK interface
>
> A ham friend called last night he wants to get on RTTY with a PC and an Icom
> IC-756 Pro III and he plans to use FSK. He wanted to know if there was an
> inexpensive interface device to handle the connections between the PC and the
> Pro III.
>
> As a Mac user I only use AFSK and could not help him. The SignaLink USB is
> good for AFSK but does not support FSK. How do FSK users handle the
> connections between the PC and and Icom?
>
> I referred him to AA5AU's web page and he did not see any mention of using
> something like the SignaLink for FSK.
>
> Dick AA5VU
> _______________________________________________
> RTTY mailing list
> RTTY@contesting.com
> http://lists.contesting.com/mailman/listinfo/rtty
_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty
|