Thanks John,
But the led is blinking in green, PTT is red,,, I gave port COM 2 for
winkey and COM 9 for FSK.
MMTY is set to COM 9 and I can see that tx starts but nothing are being
sent.
My radio is set to RTTY as well.. That is to weird...
73
Alex
On Sat, Feb 9, 2013 at 3:37 PM, Joe Subich, W4TV <lists@subich.com> wrote:
>
> If you are doing FSK, the rig needs to be in RTTY (FSK) and Router
> needs to recognize that from the CAT data. I can't see your settings
> in Win-Test and don't want to but the MMTTY window(s) need to be set
> for the correct FSK ports and they can't be the same as the WinKey
> port.
>
> All I know for sure is that Router/MK2R+ is in CW mode since the LED
> is blinking red and not green.
>
> 73,
>
> ... Joe, W4TV
>
>
>
> On 2/9/2013 9:15 AM, PY2SEX - Alex wrote:
>
>> Thanks Joe,
>> But I follow the entire doc to how to set MK2 with win-test and remains
>> the
>> same...
>> Last week worked ok for PSK in PKT mode. But in RTTY is not.. I'm here
>> more
>> than 4 hours trying to figure it out and nothing. I resetted my radio and
>> nothing, start all over and nothing again.
>> I'm missing something in the radio (I think so), or I'm really not pay too
>> much attention. :(
>> I would like to be in the contest but...
>>
>> Thanks for your help I will do everything over again.
>>
>> 73
>> Alex
>>
>> PY2SEX | DL1NX
>>
>>
>> On Sat, Feb 9, 2013 at 3:07 PM, Joe Subich, W4TV <lists@subich.com>
>> wrote:
>>
>>
>>> The LEDs on the MK2R show you are sending CW (red for CW, green
>>> for FSK). You will need to fix your settings in Win-Test and
>>> microHAM Router.
>>>
>>> See the example configuration for Win-Test and MK2R+ in Router -
>>> Help | Download Documents - or online in the MK2R Support area at
>>> www.microHAM-USA.com/Support.****html<http://www.microHAM-USA.com/Support.**html>
>>> <http://www.microHAM-USA.**com/Support.html<http://www.microHAM-USA.com/Support.html>
>>> >
>>>
>>>
>>> 73,
>>>
>>> ... Joe, W4TV
>>>
>>>
>>>
>>> On 2/9/2013 7:30 AM, PY2SEX - Alex wrote:
>>>
>>> A quick video of devices operating like working but nothing happens...
>>>> http://www.youtube.com/watch?****v=mtviNB-eaYk<http://www.youtube.com/watch?**v=mtviNB-eaYk>
>>>> <http://www.**youtube.com/watch?v=mtviNB-**eaYk<http://www.youtube.com/watch?v=mtviNB-eaYk>
>>>> >
>>>>
>>>>
>>>> Any thoughts???
>>>>
>>>> 73
>>>> Alex
>>>>
>>>> On Sat, Feb 9, 2013 at 11:54 AM, PY2SEX - Alex <py2sex@gmail.com>
>>>> wrote:
>>>>
>>>> Hello all,
>>>>
>>>>> I'm trying to be on the air but looks like my configurations is not
>>>>> working.
>>>>> I can see all light blink when I try to tx, my radio get the tx locked,
>>>>> mk2r blink the tx light, but actually nothing happens... Nobody
>>>>> replies
>>>>> me
>>>>> back, so my radio is not txing RTTY at all...
>>>>>
>>>>> Any clue for that?
>>>>> PS: I have followed all steps to configure MK2R with win-test and MMTY
>>>>> but
>>>>> still not working...
>>>>>
>>>>> --
>>>>> Vy 73
>>>>>
>>>>> Alex
>>>>> PY2SEX | PY1KS | DL1NX
>>>>>
>>>>>
>>>>>
>>>>
>>>>
>>>>
>>
>> ______________________________**_________________
> RTTY mailing list
> RTTY@contesting.com
> http://lists.contesting.com/**mailman/listinfo/rtty<http://lists.contesting.com/mailman/listinfo/rtty>
>
--
Vy 73
Alex
PY2SEX | PY1KS | DL1NX
_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty
|