This should really be asked on the fldigi support forum ...
TS-2000 requires PTT on pin 9 (PKS) when applying audio on pin 11 (PKD).
See the description of those pins on page 94 of the TS-2000 Instruction
Manual.
73,
... Joe, W4TV
On 1/28/2014 9:57 PM, Lee wrote:
I believe that I have my PC-to-radio interface cable set up right but I can't
seem to transmit any audio. The radio is keyed but no transmit audio. I have
audio to ACC2-11 and my keying is on ACC2-13. I don't see any radio menu
options that would cause an issue. Also, with the microphone attached, I can
transmit voice when the PC keys the radio so the microphone audio from ACC2
shouldn't be muted. Receive is working properly though. What am I missing?
_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty
_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty
|