RTTY
[Top] [All Lists]

Re: [RTTY] RTTY Software

To: egan.dennis88@gmail.com, rtty@contesting.com
Subject: Re: [RTTY] RTTY Software
From: Ktfrog007@aol.com
Date: Fri, 11 Apr 2014 16:40:27 -0400 (EDT)
List-post: <rtty@contesting.com">mailto:rtty@contesting.com>
Hi again,
 
In 2011 I2DMI went to Easter Island and  used multi-channel decoding.  
There is a video at _www.mdxc.org/ce0yi2dmi/_ (http://www.mdxc.org/ce0yi2dmi/)  
 
 This appears  to be the same MMVARI feature used in the RCKskimmer.  
There's  probably more info floating around or you can contact I2DMI  directly.
 
There is additional discussion in the _rtty@contesting.com_ 
(mailto:rtty@contesting.com)  archives on _www.contesting.com_ 
(http://www.contesting.com)  
 Just search on  I2DMI.
 
Don't know about 5 kHz width capability.  Maybe on an  SDR?  The RCKskimmer 
doesn't give an option for anything greater than  2.9 kHz.
 
I hope to work you wherever you're going.  Just listen  for the weak 
signal.  Good luck and safe traveling.
 
73,
Ken, AB1J
 
 
 
 
 
In a message dated 4/11/2014 16:56:41 Coordinated Universal Time,  
egan.dennis88@gmail.com writes:

I'm  looking for some RTTY software that I can use for a DXpedition. As long
as  it makes a log, I'm not interested in whether or not it interfaces to  
any
particular logging program, as long as I can make an ADIF file from the  
program.

Features I'm looking for:
1. Canned messages- at least  10.
2. Supports radio control, and split operation.
3. Shows roughly 5  KHz of band above my frequency.
4. Demodulates all signals within that  5KHz.
5. Ability to click on an indicated demodulated signal, have
the  callsign entered into the program, and a message sent.

My concept is to  set up a split operation, tell the ops to call on one 
frequency,
have  the program determine the call on any particular frequency, be able  
to
click on that callsign and have the radio Rx move to that frequency  without
my having to tune it while keeping my Tx frequency constant, and  then be 
able
to work the station.

Does anyone know of software  out there that will do this?

Dennis  W1UE

_______________________________________________
RTTY mailing  list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty

_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty

<Prev in Thread] Current Thread [Next in Thread>