TRLog
[Top] [All Lists]

[TRLog] 6.48 hiccups

Subject: [TRLog] 6.48 hiccups
From: smlondon@lucent.com (Steven London)
Date: Mon, 21 Feb 2000 09:35:31 -0700
Few comments below.

73,
Steve, N2IC

-----Original Message-----
From: Pete Smith <n4zr@contesting.com>
To: trlog@contesting.com <trlog@contesting.com>
Date: Monday, February 21, 2000 7:53 AM
Subject: [TRLog] 6.48 hiccups


>
>Just a couple of things while fresh in my mind:
>
>For the first time ever, I'm having trouble with reading frequency from my
>Kenwood TS-930 with the PIEXX board.  Had several NONCW mode reports on
>screen, accompanied by misreads of the frequency from the radio and
>blanking of the detailed stats at the top of the screen (the totals
>remained).  Why together?  Who knows, but always cleaned itself up after
>1-3 read cycles from the radio.

I also used 6.48 with a 930/PIEXX.  No problems.

>
>I also saw it read SSB mode from the radio once - something it has never
>done before.  Because the TS-930 does not have a software-controlled mode
>switch the microprocessor always reports the mode last sent to it, and it
>starts up in SSB mode.  That may have been all this was -- because it
>happened at radio start-up.

This is the way it has always worked.

Make sure that you always have MULTIPLE MODES = TRUE, regardless of the
contest.  I had my 930/PIEXX with TR get "stuck" on SSB in a previous CW
contest with MULTIPLE MODES = FALSE.


No crashes or any other bad behavior this weekend with 6.48 and 2 radios.

A little wierd when it was trying to back up to a floppy with smartdrv A+ -
seemed slow giving up control of the floppy and giving it back to real-time
logging, but sure beats waiting on the floppy without using smartdrv.




--
FAQ on WWW:               http://www.contesting.com/trlogfaq.html
Submissions:              trlog@contesting.com
Administrative requests:  trlog-REQUEST@contesting.com
Problems:                 owner-trlog@contesting.com
Feature Wishlist:         http://web.jzap.com/n6tr/trwish.html


<Prev in Thread] Current Thread [Next in Thread>