Hello all,
I was looking at TR-log features and haven't found about how (if possible) to
increment
QSO/Exchange number. Let's say we have 2 radios with 2 operators, one of them
operates
SSB and knows nothing about TR-log - keeps a paper log or whatever, the other
operates
CW and use TR-log. As the same sort of exchange RST + QSO NUMBER is used by
both,
CW op has to skip somehow a number of QSO numbers, i.e increment QSO number
without
adding anything to the log, like
1st QSO - send 599 001
2nd QSO - send 599 002
3rd QSO - send 599 007 (not 599 003 as SSB op made 4 QSO's with # 003 to # 006
in
the mean time)
etc.
Dupes etc is not an issue.
How the above can be achived with using 599 # as the exchange, in other words
how
to control #?
Appreciate if anybody gives some advise.
Best Regards and 73!
Andy
__________________________________________________
Advertise with ZFREE - to find out more click below
http://www.zfree.co.nz/about-us/advert.html
--
FAQ on WWW: http://www.contesting.com/FAQ/trlog
Submissions: trlog@contesting.com
Administrative requests: trlog-REQUEST@contesting.com
Problems: owner-trlog@contesting.com
Feature Wishlist: http://web.jzap.com/n6tr/trwish.html
|