>Set your baud rate to 1200 and not 4800. Your DBS2 should start working
>again.
Bernie, I don't understand this reasoning. The Icoms work fine with both
TR679 and TR684 with the baud rates set to 4800. Tr listens and controls the
rigs with no problems The band output information is presented on LPT1 and
LPT2. The band output work fine with TR679 but not with TR684.
How would changing the baud rate to 1200 effect the output on the parallel
port?
tnx
Syl
Sylvan Katz - VE5ZX
Saskatoon, SK
_______________________________________________
Trlog mailing list
Trlog@contesting.com
http://lists.contesting.com/mailman/listinfo/trlog
|