TRLog
[Top] [All Lists]

Re: [Trlog] New TR684.ZIP

To: "VE5ZX" <ve5zx@hotmail.com>,"K4RO Kirk Pickering" <k4ro@k4ro.net>, <trlog@contesting.com>
Subject: Re: [Trlog] New TR684.ZIP
From: "Bernie van der Walt" <bernie@internext.co.za>
Date: Fri, 3 Nov 2006 07:18:12 +0200
List-post: <mailto:trlog@contesting.com>
Hi Syl 

Set your baud rate to 1200 and not 4800.  Your DBS2 should start working again.

GL

Bernie, ZS4TX

  > What kind of Icom radio are you using, and at what baud rate?
  > The latest versions of TR-Log past 6.79 will not work below
  > 4800 baud with Icom transceivers.  If you can set the radio
  > for 4800 baud, you'll be glad you did. The response is faster.


  I have a pair of CI-V. I spent hour trying to get the DBS-2 to talk to my 
  736 and 746 Pro. I could see the digital stream from the Icom at the right 
  point on the PIC in the DBS but the PIC won't produce any output. After 
  discussion with Array Solution I found that original developer/producer was 
  SK and no schematics or support material other than the manual was 
  available. So I changed my strategy from having the DBS-2 talking directly 
  to the Icom I decided to take the band output from TR. Not an ideal solution 
  but a solution never the less. TR 679 works perfectly fine with this setup. 
  TR684 does not work. It does talk to the Icoms okay but the band output will 
  not follow the rigs and hence I loss control of my antennas and BP. A bad 
  setting? A bug?  Not sure. I can always run 679 - it worked fine in the CQWW 
  SSB.

  CU in SS

  Syl


  Sylvan Katz - VE5ZX
  Saskatoon, SK 

  _______________________________________________
  Trlog mailing list
  Trlog@contesting.com
  http://lists.contesting.com/mailman/listinfo/trlog
_______________________________________________
Trlog mailing list
Trlog@contesting.com
http://lists.contesting.com/mailman/listinfo/trlog

<Prev in Thread] Current Thread [Next in Thread>