TenTec
[Top] [All Lists]

[TenTec] Re:{TenTec} Paragon Kam interface

To: <tentec@contesting.com>
Subject: [TenTec] Re:{TenTec} Paragon Kam interface
From: dcalvin@austin.ibm.com (Duane Calvin)
Date: Mon, 23 Mar 1998 09:09:54 -0600
One note to be aware of - Kantronics wiring diagrams in their KAM-Plus
manual are INCORRECT in describing the pinouts on the 8-pin DIN
connector.  The numbers are correct when they describe function related
to a pin number, but the diagram of an 8-pin DIN shows the pins in
numerical order going around the connector - this is NOT how DIN pins
are numbered.  For a correct layout, see the diagrams on the following
web page:

http://prairie.lakes.com/~medcalf/ztx/wire/ka.html

Hope this saves others from having to tear down the connector and rewire
it like many of us have had to do!

        73,  Duane  AC5AA

-- 
Duane A. Calvin      "All statements are mine only, not my employer's."
ac5aa@juno.com  -or-  duanec@prodigy.net
Day: dcalvin@austin.ibm.com

--
FAQ on WWW:               http://www.contesting.com/tentecfaq.htm
Submissions:              tentec@contesting.com
Administrative requests:  tentec-REQUEST@contesting.com
Problems:                 owner-tentec@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm

<Prev in Thread] Current Thread [Next in Thread>