Folks,
I guess this is old knowledge and not worth wasting "bandwidth on" so I will
graciously move along and not be a pest by asking these or making any more
Inquieries here. I could not nave learned as much any where else on the
internet -- I tried and it wasn't avaiable. I surely have not seen this in
any of the threads before ---all who have responded Thanks. To those I whom
felt it a bore or " alot of bandwidth" on the subject, I appoligize for
wasting the space. To those searching the net and stumbling on this---I
hope it helps you too decide and learn.
Paul
Aloha
KI8HO
----- Original Message -----
From: Steve Baron <SteveBaron@starlinx.com>
To: Paul <pfb@eriecoast.com>; <tentec@contesting.com>
Sent: Sunday, September 19, 1999 7:48 PM
Subject: Re: [TenTec] Type and Size of the Tentec Transformer
> Wonder if both mfgrs are talking actual current draw - meased with meter -
> during operation or whether they are just giving nominal ratibgs.
>
> E.g., is TT saying 'We recommend that you plan a 22o V 15 Amp line'.
>
> Been an awful lot of band width on this topic. Wht not just call TT and
QRO
> and ask them.
>
> -----Original Message-----
> From: Paul <pfb@eriecoast.com>
> To: tentec@contesting.com <tentec@contesting.com>
To: <tentec@contesting.com>
> Date: Sunday, September 19, 1999 11:51 PM
> Subject: [TenTec] Type and Size of the Tentec Transformer
>
>
> >
> >Next Question Ham operators,
> >
> >On the Tentec Centurian it is rated at 110V with 30 amp draw and for
220V
> >it needs 15amp draw.
> >
> >QRO has a unit that is running two 500z's with a 110v current draw of
> 20amps
> >and a 220v current draw of 20 amps. I beleve it is the one with 32 lb
> >transformer from DAHL.
> >
> >Can anyone explain if it is the size and make of the transformer that is
> >making such a difference in the required currnt draw. These amps are
> close
> >to apples to apples and oranges to oranges comparisons in wattage output
> and
> >tubes. QRO has two models -- one with a 21 lb transformer with Pride
tubes
> >and QSK optional for $1895.00 and one with a 32 lb transformer choice of
> >Amperex tubes or Triton tubes and QSK ready to go for $2095.00.
> >
> >Is the Tentec Transformer a reason for the different current consumption?
> >That appears to be a substantial difference in power requirements.
> >Something I have to keep an eye on.
> >
> >This is one that I don't have an answer too. Anyone ever check the weight
> of
> >a tentec Centurian Transformer?? How do I compare this aspect in looking
> at
> >various Amps? I see nothing in the Tentec literature on the Transformer
> >other than wiring and current needed.
> >
> >
> >Paul
> >KI8HO
> >
> >
> >
> >
> >
> >--
> >FAQ on WWW: http://www.contesting.com/tentecfaq.htm
> >Submissions: tentec@contesting.com
> >Administrative requests: tentec-REQUEST@contesting.com
> >Problems: owner-tentec@contesting.com
> >Search: http://www.contesting.com/km9p/search.htm
> >
>
>
--
FAQ on WWW: http://www.contesting.com/tentecfaq.htm
Submissions: tentec@contesting.com
Administrative requests: tentec-REQUEST@contesting.com
Problems: owner-tentec@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|