I wouldn't trade my new 238 for anything!! Well almost new, had it for six
months....
At 07:51 AM 3/28/00 , Ten-Tec Inc. Amateur Radio Sales wrote:
>Good morning!
>
>I've been reading the reflector mail over the last 24 hours, especially
>the comments re: the 238 antenna tuner.
>
>We are out of stock on the tuner at the moment. Ten-Tec is
>currently running a two page color advertisement in QST and
>CQ magazines which includes the 238 antenna tuner - this is
>the first time we have advertised the tuner in the ham mags in
>many years.
>
>We had a result from the advertisements that I would not have
>predicted, but in retrospect should have seen coming: that the
>sales of the tuner spiked higher after the ads appeared. Which,
>unfortunately for our customers, and for us has left us short on
>available units over the last three months. We have a 4 week
>backorder at present.
>
>Also wanted to say thanks for all the good PR that owners of our
>equipment have shown here and other places on the Internet.
>It's greatly appreciated. We read every single message that comes
>through and I can't even count the number of times we've had
>a conversation at Ten-Tec that has begun with "Did you see the
>comment on the reflector about....." - this morning was no exception.
>
>73,
>Scott Robbins, W4PA
>Amateur Radio Product Manager
>
>
>
>
>-----------------------------------------------------------------
>Ten-Tec, Inc., 1185 Dolly Parton Pkwy, Sevierville, TN 37862 USA
> Contact Mon-Fri Eastern: Office/Tech (865) 453-7172 9 am-5 pm.
> Repair (865) 428-0364 8-4. Sales (800) 833-7373 9 am-5:30 pm.
> Fax (865) 428-4483 24 hrs. Visit us at <http://www.tentec.com>
>
> --->--->---> Please note: E-mail <sales@tentec.com> for sales
> and general product info only. We presently do not offer
> repair, parts, or kit building tech support by electronic mail,
> please telephone (865) 428-0364 or (865) 453-7172.
>
> Ten-Tec manufactures amateur radio equipment, military and com-
> mercial use HF radio equipment, custom aluminum and steel
> enclosures and has an on-premises, fully equipped tool and die
> facility supplying metal and plastic injection mold industries.
> Potential tool and die, custom enclosure or communications
> electronics customer? Contact us with your needs.
>
>--
>FAQ on WWW: http://www.contesting.com/tentecfaq.htm
>Submissions: tentec@contesting.com
>Administrative requests: tentec-REQUEST@contesting.com
>Problems: owner-tentec@contesting.com
>Search: http://www.contesting.com/km9p/search.htm
+-------------------------------------------------------+
| 73's KA5PPX/Robert McAdams/TechPlus/ARRL/10-10 #70957
| H.F. TenTec Omni VI+ HyGain TriBand @ 75'
| http://www.arrl.org Grid locator: EM13lk
| Lat: 33° 26' 50"n Lon: 97° 2' 43"w
| http://www.mapblast.com format:
| Lat: 33.45074 Lon:97.044392
| Dallas Semi Conductor weather site locator:
| (Select Lake Ray Roberts, Texas)
| http://198.3.123.122/WeatherStation/WeatherApplet.html
+-------------------------------------------------------+
--
FAQ on WWW: http://www.contesting.com/tentecfaq.htm
Submissions: tentec@contesting.com
Administrative requests: tentec-REQUEST@contesting.com
Problems: owner-tentec@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|