TenTec
[Top] [All Lists]

[TenTec] Ten Tec & RF sensitivity

To: <tentec@contesting.com>
Subject: [TenTec] Ten Tec & RF sensitivity
From: malonej@c2i2.com (Jack, W7EJJ)
Date: Sun, 10 Jun 2001 16:27:31 -0700
Hi Mike, K9UW

Negative, don't have 301/302.
--
Jack, W7EJJ

----- Original Message -----
From: "Mike & Lara Pagel" <pagel@wi-net.com>
To: "Jack, W7EJJ" <malonej@c2i2.com>
Sent: Sunday, June 10, 2001 2:45 PM
Subject: RE: [TenTec] Ten Tec & RF sensitivity


> Hi Jack:
>
> Curiosity prompts me to ask if you have the 301/302 remote tuning knob
> attached?  If so, is there any difference in RF problems if it is removed?
>
> Hope we can collectively help you figure this one out!
>
> 73, de Mike, K9UW
> Amherst, WI
>
> -----Original Message-----
> From: owner-tentec@contesting.com [mailto:owner-tentec@contesting.com]On
> Behalf Of Jack, W7EJJ
> Sent: Sunday, June 10, 2001 4:04 PM
> To: Ten-Tec
> Subject: Re: [TenTec] Ten Tec & RF sensitivity
>
>
>
> Latest Update:
>
>     Removed amp from circuit, have just Jupiter going into a MFJ-986
direct
> to end fed longwire. With 38 Watts out, 0 watts reflected and a SWR of
1:1,
> the Jupiter has RF getting into it and is useless.
>
>     No RFI in anything else in shack with 38 watts or 500 watts. Just made
> test today. Tried ferrite clamp on's to no avail. You just can not feed a
> long wire direct out of tuner with the Jupiter, but can with ICOM & JRC.
>
>     Bill:
>     If I had of tested it on the long wire when I got it, it sure would
have
> gone back. That was 3 months ago.
> -
> Jack, W7EJJ
>
> ----- Original Message -----
> From: "Bill Ames" <billames@erols.com>
> To: <tentec@contesting.com>
> Sent: Sunday, June 10, 2001 11:42 AM
> Subject: Re: [TenTec] Ten Tec & RF sensitivity
>
>
> >
> > Well, as a satisfied Jupiter owner, I would like to point out that
anyone
> > who purchases one from TT can, if they have found the Jupiter to be
> > unsatisfactory for any reason, return it. Now, I don't think those other
> ham
> > rig manufactures have this same policy. In fact most distributors have a
> > restocking fee. I think you can find something to complain about for any
> > gear, if this was not so then we would not need product reviews! (or
this
> > reflector :-)
> >
> > Bill Ames
> > KB1LG
> >
> >
> > --
> > FAQ on WWW:               http://www.contesting.com/FAQ/tentec
> > Submissions:              tentec@contesting.com
> > Administrative requests:  tentec-REQUEST@contesting.com
> > Problems:                 owner-tentec@contesting.com
> >
> >
>
>
> --
> FAQ on WWW:               http://www.contesting.com/FAQ/tentec
> Submissions:              tentec@contesting.com
> Administrative requests:  tentec-REQUEST@contesting.com
> Problems:                 owner-tentec@contesting.com
>
>


--
FAQ on WWW:               http://www.contesting.com/FAQ/tentec
Submissions:              tentec@contesting.com
Administrative requests:  tentec-REQUEST@contesting.com
Problems:                 owner-tentec@contesting.com


<Prev in Thread] Current Thread [Next in Thread>