Scott,
I know a number of hams are interested in the Orion. But how about giving
everyone an update on the new QPR DSP radio. When are we going to see that
little puppy?
Duffy - WB8NUT
>
> From: "Ten-Tec Inc. Amateur Radio Sales" <sales@tentec.com>
To: <tentec@contesting.com>
> Date: 2002/03/07 Thu AM 09:13:56 EST
> To: tentec@contesting.com
> Subject: [TenTec] Orion at Charlotte
>
> At 01:30 PM 3/5/02 -0500, AA4NN wrote:
> >FWIW, I will have a digital camera at Charlotte (Tnx K4SQR for suggesting
> >such). I intend to take some pix of the Orion and make available to
> >share individually. Just keep in mind, the Orion will be a prototype
> >where the end result may be something entirely different.
>
> Thanks for pointing that out - just as we appeared at Dayton with
> the Jupiter in tow in 2000 prior to release, I am sure that the Orion
> will change a little from what we show at Charlotte.
>
> What won't change are the physical design properties of the Orion.
> The front panel layout, placement of buttons and knobs, jacks, the
> location and size of the screen, metering is all finished. None of
> that will change. Ditto for the back panel layout, internal chassis,
> layout of internal circuit board placement and the outer case -
> all of this is complete.
>
> Scott Robbins, W4PA
>
>
> Scott Robbins, W4PA
>
>
>
>
>
> -----------------------------------------------------------------
> Ten-Tec, Inc., 1185 Dolly Parton Pkwy, Sevierville, TN 37862 USA
> Contact Mon-Fri Eastern: Office/Tech (865) 453-7172 9 am-5 pm.
> Repair (865) 428-0364 8-4. Sales (800) 833-7373 9 am-5:30 pm.
> Fax (865) 428-4483 24 hrs. Visit us at <http://www.tentec.com>
>
> --->--->---> Please note: E-mail <sales@tentec.com> for sales
> and general product info only. We presently do not offer
> repair, parts, or kit building tech support by electronic mail,
> please telephone (865) 428-0364 or (865) 453-7172.
>
> Ten-Tec manufactures amateur radio equipment, military and com-
> mercial use HF radio equipment, custom aluminum and steel
> enclosures and has an on-premises, fully equipped tool and die
> facility supplying metal and plastic injection mold industries.
> Potential tool and die, custom enclosure or communications
> electronics customer? Contact us with your needs.
>
>
>
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>
|