MarK;
I'll take the tcxo kit if it doesn't go with the radio.
73,
John N1JM
On Thursday, Mar 27, 2003, at 10:35 America/New_York, Mark Erbaugh
wrote:
My first posting generated some interest but no sale, so I'm reducing
the
price, plus I've added the TCXO kit that I forgot to list in the
original
posting:
For sale: Omni VI w/ factory opt 3 upgrade (all the features of the
VI+).
The radio includes the following accessories:
961 Power Supply / Speaker
288 1.8 kHz 6.3 MHz filter
285 500 Hz 6.3 MHz filter
282 250 Hz 6.3 MHz filter
257 Voice Synthesizer board
705 desk mic
RM3500 rack mount kit
TCXO kit (not installed)
Omni VI manual with opt 3 addenda pages
Omni VI+ manual
Home brew remote encoder built around the same Oak Grigsby encoder
used by
TT. The tuning rate of the encoder is the same as the main dial. I
also will
include a home brew cable to allow connecting a 9 pin PC serial port
and the
encoder to the 25 pin connector on the back of the Omni VI
The radio was back to TT in the spring of 2002 for checkout /
alignment.
Everything works. The cabinet is in good shape. I did notice that the
RTTY
tones in FSK need alignment. They appear to be about 130 Hz split
rather
than 170, but they are no problem to copy. With AFSK operation (of
course)
RTTY is
170 Hz.
I'd like $1700 plus shipping for the package. I would consider offers
on
just the radio or the radio and some of the accessories, but will not
sell
the accessories until the radio is sold.
(just in case) Would also consider trading the radio towards an Orion.
73,
Mark, N8ME
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|