At 09:26 AM 6/4/2003 -0400, you wrote:
>At 08:42 AM 6/4/2003 -0400, you wrote:
>>Also, how far off in frequency was the RX340 in normal operation vs with the
>>external reference?
>>
>>73,
>>Mark
>
>This is not so much of an issue as it may be if you are using several
>receivers perhaps in
>space or polarization diversity or plan to use a transmitter or
>transceiver along with the RX340.
>In that case you may want to run all of them off the same reference so
>their frequency settings
>will agree.
Indeed. I actually bought *two* of the standards; the second one will be
used at a site with two 60 foot dishes at it as a reference for the LNB
up at the focal point *and* the receiver down below. Having the LOs drift
independently would cause false Doppler readings to show up.
>73
>Bill wa4lav
>
>
>_______________________________________________
>TenTec mailing list
>TenTec@contesting.com
>http://lists.contesting.com/mailman/listinfo/tentec
--
Eric F. Richards
efricha@dimensional.com
"The weird part is that I can feel productive even when I'm doomed."
- Dilbert
|