TenTec
[Top] [All Lists]

Re: [TenTec] ScoutII

To: tentec@contesting.com
Subject: Re: [TenTec] ScoutII
From: Bwana Bob <wb2vuf@qsl.net>
Reply-to: wb2vuf@qsl.net, tentec@contesting.com
Date: Sun, 09 May 2004 22:26:28 -0400
List-post: <mailto:tentec@contesting.com>
What's this about a Scout II? I didn't hear about it. I thought that the
Argonaut V replaced the Scout. Also, it was the 1940's vintage AN/CRT-3
rescue transmitter that had the reel out antenna.

                Bob WB2VUF

Ben K8DIT wrote:
> 
> The new mobile rig ScoutII will appear in the same cabinet as the original.
> Instead of the plug-in modules, the new technology will accomodate the usual
> hambands including 5, 50, 144, 220 and 440 mhz bands. Otherwise the Scout
> will have changed little in its appearance and performance specs. 50 watts
> out is more than adequate and so it can use the same size heatsink. A
> metron-like solid state no tune amp could accompany this rig as a QRO option
> in a latch together configuration with a handle. The handle could contain a
> mic., key, and headphones.
> James Bond might have had this designed by Q had I not described it in such
> detail.
> The remaining room in the case might be used to place other items you might
> need on your date with destiny, like a speedo and beach towel, a tower and
> yagi w/rotor, or just simply the motorized parts necessary to make your own
> matching device having removed the 500' spool of #12 copper stranded antenna
> wire.
> 
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec

_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec

<Prev in Thread] Current Thread [Next in Thread>