Don
Not quite.......to interface the Orion to the FL7000 for auto band
change you will require some logic to make the interfaces compatible.
This will take the form of a 16 to 4 line encoder of some type.
Definately not just a cable. If you are not familiar with binary logic
yourself you'll need to enlist the help of someone local to you who is.
I hope I've clarified that for you.
73 Bob, 5B4AGN
Don wrote:
Bob
"It is possible to auto band change the FL7000 or other Yaesu amp from
the Orion but not without an encoder to produce compatible band data.
Yaesu provide binary parallel band data from their radios and that is
what the FL7000 uses for auto band switching."
So if I understand this correctly to "auto" band switch all I should have to do
is make up the cable? Just want to confirm that I am reading correctly.
thanks
Don kd6hq
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|