John,
Unfortunately that IS a problem with v1.371. I spent most of last weekend
troubleshooting that to no avail. I also had to go back to v1.370 which
totally eliminated all of those problems. Ten Tec is aware of this problem
and have been working on getting it fixed.
Tom- W4BQF
----- Original Message -----
From: "john, ke5c" <ke5c@hot.rr.com>
To: "Ten-Tec Reflector" <tentec@contesting.com>
Cc: <ditsnbits@tentec.com>
Sent: Friday, June 18, 2004 8:59 PM
Subject: [TenTec] Orion 1.371 wierd one
> I don't see a posting about this, but I've been running 1.371 almost since
> it came out but I've been busy and not QRV often. Tonite in the middle of
a
> CW QSO while transmitting, it quit. My Centurion remained keyed, but no
CW.
> I power cycled the Orion, and same thing - if I started to transmit, the
> Orion would go into transmit mode, but no CW - no sidetone, no power.
> Finally I did a master reset, and it went back to working - very briefly,
> maybe a minute of CW. Then the same thing showed up. After two more
master
> resets, I was beside myself since this Orion is supposed to be our club's
CW
> rig for Field Day. Just for grins, I reloaded 1.370 and all is back to
> normal, at least for now. This is just FYI, and no, I wasn't running the
> dreaded spectrum display.
>
> 73, John
>
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|