Running multiple dipoles from a single feed line is pretty well documented in
most antenna handbooks. You dont need and dont want 4 separate feed lines
going to the array.
No matter what your doing with a diploe/s you will want to install a 1:1 bal
to unbal current balun at the feed point. The balun is available from Radio
Works. Or, find an FT-240-61 toroid and wind it with about 12 turns of
RG-58U-PE
coax, 6 turns on one side and 6 turns on the other side. I am attaching a
.jpg drawing for your use as to what the end product should look like when
completed. The design is not mine.
Have Fun
73
John / N0KHQ / St. Louis
Always on 18.130
Antennas:
You can build 'em better than you can buy 'em
Please visit the sites below:
http://www.hamuniverse.com/antennas.html
http://www.cebik.com/n0khq.html
http://www.ssb-audio.com/forum/
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|