Why use a switch at all? Tie all three antennas together at the coax. Run
them parallel. The RF knows where to go. I am using 40, 30 and 20m parallel
dipoles with a common coax feed.
Bill
================================================
I'm curious if I should disconnect the dipoles i'm not using to
avoid creating weird nulls or other problems or if it is okay to leave
them connected to the switch all the time - the main reason I ask is the
antenna switch I have connects the center and shield to ground when they
are not selected on the switch, in essence creating ground radials
fairly close to the active dipole.
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|