Slater this was my primary reason for modifying my Omni V and installing the
Omni V.9 processor.
http://www3.telus.net/ve7tk/omni_V9.pdf
The code for the CPU was written by Carl N4PY and the serial port now
emulates an Icom 761. I modified my rig more that 4.5 years ago and
wouldn't go back. I'm currently running Logger32 and controlling the rig
with both that software or some N4PY software. A description of my station
is on my site and if you want more info I'd suggest you contact Carl
directly.
73,
Rick
VE7TK
website: http://www3.telus.net/ve7tk/
----------------------------------------------------------------------------
------
From: Slater Tubman <s.tubman@sasktel.net>
Subject: [TenTec] Serial port and OMNI V
To: ten-tec reflector <tentec@contesting.com>
I "cracked" the mystery of how the USB/Serial cable will drive the OMNI
V running MixW on a Mac. The secret lies in the Virtual PC program on
which I run MixW. I had to configure the ports in the basic Virtual PC
program, then just match them in MixW. Works great.
I should have figured this out before.
Thanks for the feedback on my enquiry.
Still interested in why Ten-Tec put the RS 232 port on the OMNI V.
73
Slater VE5OA
--
Outgoing mail is certified Virus Free.
Checked by AVG Anti-Virus (http://www.grisoft.com).
Version: 7.0.269 / Virus Database: 264.8.0 - Release Date: 06/09/2004
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|