One other thought,if it has a power switch,see if you get power to it,I had
a 540 once but dont remember its layout too well, Hang on to your hatDoc,
Wishing You well during Jeane...73' John KF7OM
> [Original Message]
> From: doc <kd4e@verizon.net>
> To: <tentec@contesting.com>
> Date: 9/25/2004 4:35:06 PM
> Subject: Re: [TenTec] Reverse Polarization Damage to Triton 540?
>
> John Gabbard wrote:
> > Doc, check and see if there is an internal fuse in the rig. then check
to
> > see if you are getting power to all boards. There may be a diode for
> > reverse voltage protection also,should be on your schematic, look
around
> > the entry of the 13.8 voltage.John KF7OM
>
>
> I don't have the schematic, I do have one on the way via snail mail.
>
> I have also contacted TenTec about a complete manual but haven't heard
> back ... they've been a bit bust there this weekend I hear!
>
> Have to dodge another hurricane now but hopefully will have phone
> service after Jeanne passes and will be back on the list.
>
>
> --
> Thanks! & 73, doc kd4e
> West Central Florida 100% Linux. Suse 9.1
> Drake, Hallicrafters, Heathkit, TenTec, Yaesu
> Radio Life: http://www.gospelcom.net/twr/
> Linux-Incompatible hardware is defective!
> USA Pres. Election 2004: http://www.rnc.org/
> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|