[TenTec] Omni VI, opt3 problem

[<wlbaber@bellsouth.net>]

After 7 or 8 years my first difficulty with Omni VI...no signals on 20 meters 
but audio, and audio and signals on all other bands.  No power output  on all 
bands but low-level signal is there.  I know it has to go back, but wonder if 
anyone can comment on what may be the problem.  I went into it to adjust the 
bfo, which was off a significant amount--couldn't quite at the LSB BFO to 9.000 
Mhz but close enough.  Put covers back on, and was in receive when it stopped 
receiving on 20 meters.  

I'll bet I'm no the only one!  Thanks.

73, will, wj9b, dit dit