Rick and All,
Interesting options. I plan to use the Processor switch. I have a narrow
filter, and you processor is not used in CW or psk 31. On phone, I plan to
back off the processor control off which is the same as turning it off (I
think) when I don't need it.
At 01:14 PM 8/7/2005, Rick Williams wrote:
>Dave and all.
>
>The Omni V looks like it has another option. Unlike the Omni VI, the NB is
>switched with a push button on the front panel. The 'intensity' of the NB
>is adjusted with a 10 kohm pot.
>
>My plan is two-fold:
>
> 1) replace the 10 kohm pot with a switched 10 kohm pot to do both
>functions. This would free up the NB button on the front panel.
>
> 2) Switch the roofing filter on my Omni V.9 with the NB switch on the
>front panel
>
>I have the parts -- I just haven't found the time BUT I think it will work
>quite well and I lose NO functions.
>
>Thoughts?
>
>73,
>
>Rick
>VE7TK
>
>Website: http://www3.telus.net/ve7tk
>
>
>
>------------------------------
>Message: 6
>Date: Sun, 07 Aug 2005 1
>Subject: Re: [TenTec] INRAD ROOFING FILTER & AUDIO MOD FOR OMNI VI
>To: Discussion of Ten-Tec Equipment <tentec@contesting.com>
>
>------------
>The FM and VOICE buttons (nor any other button on the main keypad)
>CANNOT be used directly for this function. They have a different logic
>interface with the main ?Processor and would require a buffer in order
>to drive another load, such as the Inrad roofing filter mod.
>
>73, Dave, K1FK
>Fort Kent., ME
>ARRL Life Member
>
>_______________________________________________
>TenTec mailing list
>TenTec@contesting.com
>http://lists.contesting.com/mailman/listinfo/tentec
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|