Don't these numbers apply to "long" lines (many wavelengths and/or an exact
multiple of a quarter wavelength)?
I have been wondering about the following: If you have a short line, the
loss should be different. That's because the loss is normally due to I^2R --
it mostly arises where the current is maximum. If you have, say, a line less
than 1/8 wavelength long feeding a high Z load, the loss should be rather
small, because the entire line is high voltage / low current.
This is probably not important for most antenna applications.
73 Martin AA6E
On 10/4/05, Sinisa Hristov <shristov@ptt.yu> wrote:
>
> Following the recent discussion of open wire feedlines,
> I've compiled a 3-page PDF with some useful details.
>
> The 70 KB file can be downloaded from:
> http://www.geocities.com/va3ttn
>
> Basic definitions and explanations are given,
> along with two tables giving total loss and additional loss
> in the presence of mismatch.
>
> Open wire lines can achieve "low loss in presence of high SWR"
> only to a limited extent, just like other lines.
> The tables given should assist in making right decisions.
>
>
> 73,
>
> Sinisa YT1NT, VE3EA
>
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>
--
martin.ewing@gmail.com
http://blog.aa6e.net
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|