TenTec
[Top] [All Lists]

Re: [TenTec] twin lead fed, 10, band dipole w/ 2 low band verticals

To: Discussion of Ten-Tec Equipment <tentec@contesting.com>
Subject: Re: [TenTec] twin lead fed, 10, band dipole w/ 2 low band verticals
From: Ken Brown <ken.d.brown@verizon.net>
Reply-to: Discussion of Ten-Tec Equipment <tentec@contesting.com>
Date: Fri, 20 Jan 2006 07:50:10 -1000
List-post: <mailto:tentec@contesting.com>
Yes!
>  ALSO, don't forget the knife switch!  A knife
> switch before entering shack, that disconnects the
> feedline, and shorts it together for a voltage feed
> connection, makes the set up operational for 80 meter
> (and 160M if you have at least 65 ft. of feedline).
>   
Thanks for reminding me. I can do that in time for the CQ 160 CW test, 
and then phase it with my inverted L, perhaps to some advantage for 
receiving noise rejection. Doubt that I'd get any worthwhile TX gain, 
but maybe. All the controls will be right in the shack. More Knobs to 
twiddle!

DE N6KB

_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec

<Prev in Thread] Current Thread [Next in Thread>