AL how much power were you running???, Mac (have a scout and just wondering)
----- Original Message -----
From: ARDUJENSKI@aol.com
To: tentec@contesting.com
Cc: service@tentec.com
Sent: Thursday, May 04, 2006 12:08 PM
Subject: [TenTec] 937 PS-troubleshooting-(blush)-TNX TEN TEC--Lesson Learned
RADIO: 555 SCOUT
ISSUE: Chirp on the CW signal. Voltage at output of 937 was dropping from
14.2 TO 10.3
LESSON LEARNED
Well, after checking several potential problems and not identifying the
culrpit I tried an Astron 7 amp and same problem but noticed meter light was
dimming. I made a call to TEN TEC thinking the problem may in fact be the
SCOUT
and I may have to ship that out.
I talked with GARY at Ten Tec and with an AH HA and a rub of the chin, Gary
said he thought he knew what the possible problem was-- RUNNING MORE THAN 50
WATTS on the Scout. I had readjusted the RF CONTROL from 5watts and just
turned the adjustment all the way clockwise. Well dang it HE WAS RIGHT. With
power meter and dummy load in hand backed off the drive and everything is
working
great.
ONE MORE THING: Gary noted sometimes the caps to the final C1 and C4 could
have been the wrong value or need replacing with 100v 104s (0.1). Thankfully
that was not at issue
I thought I would pass this LESSON LEARNED along. Not quite as bad as not
having it unplugged but close (smile)
Thanks to all who have responded and especially GARY AT TEN TEC
Alan KB7MBI
Woodinville, WA
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|