TenTec
[Top] [All Lists]

Re: [TenTec] 937 PS-troubleshooting-(blush)-TNX TENTEC--Lesson Learned

To: Discussion of Ten-Tec Equipment <tentec@contesting.com>
Subject: Re: [TenTec] 937 PS-troubleshooting-(blush)-TNX TENTEC--Lesson Learned
From: ron <roncasa@verizon.net>
Reply-to: roncasa@verizon.net,Discussion of Ten-Tec Equipment <tentec@contesting.com>
Date: Thu, 04 May 2006 14:47:31 -0400
List-post: <mailto:tentec@contesting.com>
always check the last thing you did, touch, adjust, etc.

Glad you (he) solved the problem!

I always run my Scout at 40 watts. It likes that setting.

Ron, wb1hga

Alan, KB7MBI writes:
>   LESSON LEARNED

>   I talked with GARY at Ten Tec and with an AH HA and a rub of the chin, Gary 
>  
>   said he thought he knew what the possible problem was-- RUNNING MORE THAN  
> 50 
>   WATTS on the Scout. I had readjusted the RF CONTROL from 5watts and just  
>   turned the adjustment all the way clockwise. Well dang it HE WAS  RIGHT. 
> With 
>   power meter and dummy load in hand backed off the drive and  everything is 
> working 
>   great.

_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec

<Prev in Thread] Current Thread [Next in Thread>