Paul Gates, KD3JF wrote:
> I have the WMR cable and cd with the drivers. Alot of the cables sold will
> work if you have the needed drivers for it to work. If you get the WMR one be
> sure you install the drivers before you plug in the cable to the USB port.
>
> Paul, KD3JF
> Glen Burnie, MD
> FM19qd (Map Grid Square)
I've been following this thread. The exact same IOgear cable is
available from Walmart for $25, and their 4 port hub is under $10. Works
perfectly under XP for rig control and digi modes, and AFSK RTTY. Using
Linux no drivers are required, just plug and play.
Ed W3NR
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|