TenTec
[Top] [All Lists]

Re: [TenTec] Help Selecting a Directional Antenna

To: "Discussion of Ten-Tec Equipment" <tentec@contesting.com>
Subject: Re: [TenTec] Help Selecting a Directional Antenna
From: "Carl Moreschi" <n4py@arrl.net>
Reply-to: Carl Moreschi <n4py@arrl.net>,Discussion of Ten-Tec Equipment <tentec@contesting.com>
Date: Mon, 21 Aug 2006 16:21:25 -0400
List-post: <mailto:tentec@contesting.com>
I have a Tennadyne T8.  It has performed extremely well for 12 years.  There
are no traps or motors or anything to go wrong.  The antenna covers 14 to 30
mhz very well with a good front to back ratio and has been maintenance free
all this time.

Carl Moreschi N4PY
121 Little Bell Drive
Bell Mountain
Hays, NC 28635
----- Original Message ----- 
From: "George" <goofyham@highstream.net>
To: "Discussion of Ten-Tec Equipment" <tentec@contesting.com>
Sent: Monday, August 21, 2006 4:17 PM
Subject: Re: [TenTec] Help Selecting a Directional Antenna


> I concur with Gert recommending a SteppIR 3 element beam. I chose it
because
> of it's mono band operation on every frequency from 13.9Mhz to 53Mhz and
> everything in between and it isn't a monster. Besides, it doesn't weigh a
> ton and can be easily torn down to move it. During icy winter days here in
> the Buffalo, NY area all I do is retract the elements that fide inside 16
> foot fiberglass poles of sorts. I've had it up for almost two years now.
> Oh, by the way the SteppIR people are terrific to work with!!!
> I'm currently waiting for the 30M and 40M add on kit for my 3 element
> SteppIR beam.
> Just my two cents.
> George
>
>
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec

_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec

<Prev in Thread] Current Thread [Next in Thread>