With all the posts about the IP address I decided to check my Omni VII
to see what the deal is.
I found can set any of the radio IP addresses or G8way IP addresses
anywhere between 0.0.0.0 to 255.255.255.255. Also, I noticed mine
doesn't have 001 or 002 it just has 1 or 2, no leading zeros.
I'm running the lastest firmware and bootloader as well.
Mine is one of the early Omni VII's so maybe there's a hardware difference.
73,
Alan N5NA
http://www.tentecwiki.org
Jeff Iddings wrote:
> Good evening all!
>
> Is it just me, does the IP setup in the Omni VII not allow you to set an
> octet of 0? E.g. 192.168.0.147? When I get to the 3rd octet and turn the
> multi knob all the way to the left or right, the lowest number is 001
> and the highest is 255. What gives? Latest firmware, latest boot loader.
>
> Any advice would be fantastic!
>
> Thanks!
>
> Jeff - W4GPL
> Brand new Omni VII owner...
>
>
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|