Well on 220 volt systems there is no neutral as such. Only two hot leads,
and ground. One would expect that the green wire is ground of course. That
leaves the other two as hot.
73 de Gary, AA2IZ
----- Original Message -----
From: <Hamdriver66@aol.com>
To: <tentec@contesting.com>
Sent: Friday, January 04, 2008 11:10 PM
Subject: [TenTec] Centaur Power Cord
> I just bought a used Centaur and want to change from 110v to 220v source.
> Have reconfigured jumpers for 220v but don't understand the color code to
> install 220 plug on power cord. Changing from AL811H which uses
standard
> "black/white/green" color coding, Centaur has "blue/green/brown" wiring
color code.
> Can anyone enlighten me on which color is neutral, etc ? Thanks for the
> help, 73. Mike K4KJC
>
>
>
> **************Start the year off right. Easy ways to stay in shape.
> http://body.aol.com/fitness/winter-exercise?NCID=aolcmp00300000002489
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>
>
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|