That's how my Orion 1 works - S9 on Ant1 can just be heard with no S-meter
movement with Ant 2 selected.
73, Duane
Duane Calvin, AC5AA
Austin, Texas
www.ac5aa.com
-----Original Message-----
From: tentec-bounces@contesting.com [mailto:tentec-bounces@contesting.com]
On Behalf Of Merv Schweigert
Sent: Monday, January 07, 2008 10:25 PM
To: Carl Moreschi; Discussion of Ten-Tec Equipment
Subject: Re: [TenTec] Need help from an Orion owner......
>
> I just listened on my Orion. I found an S9 CW station on antenna 1.
> Switching to antenna 2, I could just barely hear him at S1. This is great
> isolation. So the real question is how many S units lower are you hearing
> the station with antenna 2 selected. Mine is showing greater than 8 S
units
> lower.
>
> Carl Moreschi N4PY
>
I realize its not a Ten Tec but if you are interested in a comparison,
Ft-1000D signal 30 db over 9, just audible with ant 2 selected.
thats more what I consider isolation. YMMV
My Omni 6 with S9 signal can just hear the ant 2 selected,
no meter movement.
I sure dont need a radio that can hear off the other antenna port.
Merv K9FD/Kh6
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|