TenTec
[Top] [All Lists]

Re: [TenTec] NEW Orion II/2.041XL Bug? Red Scan With Vertical Line Patte

To: tentec@contesting.com
Subject: Re: [TenTec] NEW Orion II/2.041XL Bug? Red Scan With Vertical Line Patterns
From: kc9cdt@aol.com
Reply-to: Discussion of Ten-Tec Equipment <tentec@contesting.com>
Date: Sun, 08 Mar 2009 18:49:36 -0400
List-post: <tentec@contesting.com">mailto:tentec@contesting.com>
Jim,
This is what we have been talking about all along...nothing new.
Just about everyone has seen it.

73,
Lee



-----Original Message-----
From: Jim M. <jmiller1706@cfl.rr.com>
To: 'Discussion of Ten-Tec Equipment' <tentec@contesting.com>
Sent: Sun, 8 Mar 2009 5:54 pm
Subject: Re: [TenTec] NEW Orion II/2.041XL Bug? Red Scan With Vertical Line 
Patterns



The radio had been running on Rx for a few hours, 20 and 80 meters.  The 80m
band was dead, mostly just local line noise.

I am now getting the normal white spectrum, but now behind it the entire
scan screen (up to the blue marker, is filled with red, first solid red,
then alternating red/black that starts at the top and walks downward, then
solid red again.  Occasionally the white spectrum trace will wipe itself
away from right to left.  Is this what you folks are seeing, or is this new?
By turning sweep off and on again it began working correctly.

Previously I had only seen this as a brief red spectrum trace (the white
trace disappears for a half second or so), and I thought this was what you
were seeing.  Just before this new phenomenon started, I was tuning and
happened to catch the spectrum in a "red only" trace...and it froze in all
red color as long as I would turn the tuning knob.

I took some photos at:  http://s685.photobucket.com/albums/vv219/N4BE/

Jim N4BE



_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec

_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec

<Prev in Thread] Current Thread [Next in Thread>