TenTec
[Top] [All Lists]

Re: [TenTec] Argosy I issues as well as Argosy II issues

To: Discussion of Ten-Tec Equipment <tentec@contesting.com>
Subject: Re: [TenTec] Argosy I issues as well as Argosy II issues
From: Ed - K9EW <k9ew57@gmail.com>
Reply-to: Discussion of Ten-Tec Equipment <tentec@contesting.com>
Date: Mon, 16 Mar 2009 22:07:06 -0500
List-post: <tentec@contesting.com">mailto:tentec@contesting.com>
Hi Mike,

Maybe the heterodyne oscillator for 80m has low output, or it may be
far enough off frequency to be attenuated by the 80m filtering.  If
possible, follow the RF from the PTO through the mixer with an
oscilliscope on a good band and on 80m and compare voltage levels.

Good luck - hope you find your missing drive level.

73,
ed - k9ew
www.k9ew.us
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec

<Prev in Thread] Current Thread [Next in Thread>