I only get mine to work by being by using the 15m position. Won't work right on
20, I have Centurion and Titan
--- On Sun, 1/10/10, Jim Brown K9YC <k9yc@audiosystemsgroup.com> wrote:
From: Jim Brown K9YC <k9yc@audiosystemsgroup.com>
Subject: Re: [TenTec] Help with Centurion Amp
To: "tentec@contesting.com" <tentec@contesting.com>
Date: Sunday, January 10, 2010, 12:40 PM
On Sun, 10 Jan 2010 03:26:18 -0800 (PST), Joe Palmer wrote:
>Can't get it to work on 17 meters. Any comments appreciated.
My three Titan 425s work on 17M in the 20M position of the
bandswitch (and on 12M in the 15M position). In both cases it puts
out full power, and tuning is at the low extremes of the two
capacitors. The Titan 425 was designed around 1980 when ham
allocations on those bands didn't yet exist, but were being
proposed).
73,
Jim K9YC
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|