To use the Centurion on 17 the bandswitch must be in the 15 meter position.
I verified this with TT many moons ago.
AND: My Centurion, which I purchased used from TT, came with a mod kit for
15/10 meter operations. This board improves performance/efficiency of 15
(and 17) meters). In addition, relay K1 in used to switch a 10 meter low
pass filter. The part number is 81546 and is only available from TT.
Mike
W8TRN
Message -----
From: "Randy Fulco" <rfulco@bellsouth.net>
To: "Discussion of Ten-Tec Equipment" <tentec@contesting.com>
Sent: Sunday, January 10, 2010 18:03
Subject: Re: [TenTec] Help with Centurion Amp
Let me try that again...15m is the band to use on 17m, Still input will have
some swr to rig..RF
--- On Sun, 1/10/10, Joe Palmer <w8jxm@yahoo.com> wrote:
From: Joe Palmer <w8jxm@yahoo.com>
Subject: [TenTec] Help with Centurion Amp
To: tentec@contesting.com
Date: Sunday, January 10, 2010, 5:26 AM
Hello To All:
Just got the amp. Works well on all bands listed on band switch/
Can't get it to work on 17 meters. Any comments appreciated.
Pse send to w8jxm@yahoo.com.
Tnx es 73. Joe
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
--------------------------------------------------------------------------------
No virus found in this incoming message.
Checked by AVG - www.avg.com
Version: 9.0.725 / Virus Database: 270.14.133/2612 - Release Date: 01/10/10
12:35:00
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|