TenTec
[Top] [All Lists]

Re: [TenTec] Pegasus 550

To: tentec@contesting.com
Subject: Re: [TenTec] Pegasus 550
From: "Dr. Gerald N. Johnson" <geraldj@weather.net>
Reply-to: geraldj@weather.net, Discussion of Ten-Tec Equipment <tentec@contesting.com>
Date: Mon, 29 Mar 2010 12:33:58 -0600
List-post: <mailto:tentec@contesting.com>
Newark lead time 104 days. Not quite a stock item. Mouser lists them too, but none in stock, ask for a quote to get lead time. Digi-Key doesn't admit the part. Farnell UK says they will get them from their US branch, Newark who doesn't have any.

Looks like unobtanium. Don't wreck any unless TenTec has a stock. It could be that there is a no lead replacement that a simple search on the part number doesn't show except that Farnell says it is ROHS compliant.

Could it be a problem of contact oxidation? Where there needs to be some DC run through the contacts ala telephone office sealing current and a factory mod for the TS430S a few years ago?

73, Jerry, K0CQ

On 3/29/2010 12:04 PM, phil g wrote:
Here is a link to the relay.  Also avail. from Ten Tec.
http://www.newark.com/jsp/search/productdetail.jsp?SKU=45M7086

Fairly straight forward to replace.  Unsolder the old, solder in the new.

n4zsa


<Prev in Thread] Current Thread [Next in Thread>