Is there provisions for keying T T amps? in/out 73
Ed K7UC
----- Original Message -----
From: <wa3fiy@radioadv.com>
To: "Discussion of Ten-Tec Equipment" <tentec@contesting.com>
Sent: Wednesday, September 29, 2010 8:25 AM
Subject: Re: [TenTec] Eagle Data Bus
The Eagle is a very interesting rig. From the looks of things it will be
nice and simple to use
while providing great receiver performance once it is set-up. Looks good
too! :-) I use an
Argonaut V and find it to be a nice size, small but with control knobs and
buttons large
enough to be confortable.
It's hard to imagine packing all that stuff in such a small package.
The only thing I do not
like about what I see so far is the internal fan. I hate fans!!!!
But....to put a 100 watt PA in
that little package it can't be avoided.
I'm really interested in the "Enable", "Data" and "Clock" pins on the ACC1
connector. Looks
like the internal data bus is available (buffered I hope :-) to the
outside world. That opens the
door to a bunch of options. Wonder what Ten Tec has in mind? The
possibilities are
endless.
Patience Lee......patience. :-)
73,
-Lee-
WA3FIY
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|