TenTec
[Top] [All Lists]

Re: [TenTec] Is The Eagle really soaring yet?.

To: tentec@contesting.com
Subject: Re: [TenTec] Is The Eagle really soaring yet?.
From: "Dr. Gerald N. Johnson" <geraldj@weather.net>
Reply-to: geraldj@weather.net, Discussion of Ten-Tec Equipment <tentec@contesting.com>
Date: Tue, 12 Oct 2010 18:20:20 -0500
List-post: <mailto:tentec@contesting.com>


On 10/12/2010 5:48 PM, David Goncalves wrote:
Is there something more to it than a relay and a connector? If not, I'd
believe that they left it out to keep costs down; should be no problem to
whip up the external stuff to do the same job.

David Goncalves
W1EUJ

So true. If there is a signal its in receive mode or on that its in transmit mode, like RX+ or TX+ or PTT on the control connector that can run an external relay to put the receiver on a separate antenna. Not as fast as a PIN diode switch, but the PIN diode switch would be possible too. Might need a half amp at 12 volts for a good PIN diode switch. Probably can borrow circuits from an OMNI V or VI. Not much need to invent anything.

73, Jerry, K0CQ

<Prev in Thread] Current Thread [Next in Thread>