TenTec Mailing List (date)

TenTec Mailing List (date)

[Thread Index] [Top] [All Lists]

October 31, 2010

Re: [TenTec] What Model Ten-Tec Rig Do I Need ?, Dave Edwards, 21:15
Re: [TenTec] What Model Ten-Tec Rig Do I Need ?, Rick - NJ0IP / DJ0IP, 21:07
[TenTec] What Model Ten-Tec Rig Do I Need ?, John Westerlage, 21:00
Re: [TenTec] Tuner time, Richards, 20:54
Re: [TenTec] Question for Techies, cont'd., Dr. Gerald N. Johnson, 20:53
Re: [TenTec] Question for techies, Richards, 20:33
[TenTec] Question for Techies, cont'd., John Rippey, 19:48
Re: [TenTec] Question for techies, Dr. Gerald N. Johnson, 18:31
Re: [TenTec] Question for techies, Ray Sills, 17:24
[TenTec] Question for techies, John Rippey, 15:47
Re: [TenTec] More on problem after master reset and battery, N4PY2, 08:17
[TenTec] More on problem after master reset and battery, Zivney, Terry L., 08:05

October 30, 2010

Re: [TenTec] Orion problem after master reset - band buttons put 00000 in VFOs, Barry N1EU, 21:22
Re: [TenTec] Orion problem after master reset - band buttons put 00000in VFOs, N4PY2, 21:17
Re: [TenTec] corsair II carrier, Dr. Gerald N. Johnson, 20:59
Re: [TenTec] Orion problem after master reset - band buttons put 00000 in VFOs, Barry N1EU, 20:24
[TenTec] Orion problem after master reset - band buttons put 00000 in VFOs, Zivney, Terry L., 20:16
Re: [TenTec] Tuner time, Bwana Bob, 18:58
[TenTec] Tuner time, Roger Rippy, 17:45
[TenTec] fs 238 tuner, k8bbm, 16:47
[TenTec] corsair II carrier, k8bbm, 16:47
Re: [TenTec] Tuner time, m1e4r3s2, 16:45
Re: [TenTec] Tuner time, Ken Brown, 16:38
[TenTec] Hercules II, Titan (Model 425), and Antenna tuner Model 253 for sale, Alan Zaur, 16:13
[TenTec] Tuner time, Roger Rippy, 15:26
[TenTec] (no subject), scott sheppard, 00:08

October 29, 2010

[TenTec] For Sale: Orion, 307 Speaker, 1315 15M QRP CW Xcvr, D Michael, 20:53
Re: [TenTec] How to modify the 599 to get the RX antenna output for SDR or other usages, Bwana Bob, 19:32
Re: [TenTec] tuner, OT, Bwana Bob, 19:19
[TenTec] WTB: Omni VII bandpass filter board, Denton, 15:15
[TenTec] Ten-Tec for sale, Phil Parrish, 15:03
Re: [TenTec] question on TT- 546, Mike Hyder -N4NT-, 13:13
Re: [TenTec] 2.8 filters and Omni V...just won't work, Dr. Gerald N. Johnson, 11:43
Re: [TenTec] question on TT- 546, JOSEPH DAVIS, 11:16
Re: [TenTec] 2.8 filters and Omni V...just won't work, Rob Atkinson, 08:13
Re: [TenTec] 2.8 filters and Omni V...just won't work, Richards, 07:05

October 28, 2010

Re: [TenTec] 2.8 filters and Omni V...just won't work, Dr. Gerald N. Johnson, 22:19
[TenTec] 2.8 filters and Omni V...just won't work, scott sheppard, 22:10
[TenTec] Eagle Inputs, Henry, John, 17:10
Re: [TenTec] ten tec Eagle, Richards, 14:35
[TenTec] ten tec Eagle, KEN RINDFLEISCH, 13:26
Re: [TenTec] question on TT- 546, Rick - NJ0IP / DJ0IP, 11:03
[TenTec] question on TT- 546, JOSEPH DAVIS, 09:58

October 27, 2010

[TenTec] TEN TEC 238 ANTENNA TUNER, Albert Brooks, 21:56
[TenTec] FS 238 tuner, k8bbm, 20:55
Re: [TenTec] Argosy noise blanker, Mike Hyder -N4NT-, 19:23
Re: [TenTec] How to modify the 599 to get the RX antenna output for SDR or other usages, Stuart Rohre, 17:34
Re: [TenTec] How to modify the 599 to get the RX antenna output for SDR or other usages, Anonymous, 16:38
[TenTec] How to modify the 599 to get the RX antenna output for SDR or other usages, Henry, John, 16:23
Re: [TenTec] tuner, OT, John Molenda, 13:37
[TenTec] Argosy noise blanker, Jerry Kitterman, 13:03
Re: [TenTec] tuner, OT, Rob Atkinson, 09:40
[TenTec] tuner , OT, John Molenda, 02:11

October 26, 2010

Re: [TenTec] TenTec FS, George R.Griesbach, 19:25
Re: [TenTec] Need Switch for 229B, Richards, 19:24
[TenTec] Need Switch for 229B, Jim Brown, 19:10
[TenTec] 262G power supply, Sain'T Tom, 15:24
Re: [TenTec] OMNI VII Firmware version, Roger Wise, 09:49
Re: [TenTec] OMNI VII Firmware version, Richards, 01:20

October 25, 2010

[TenTec] OMNI VII Firmware version, Phil Coley, 23:58
[TenTec] Looking for Tuner, John Molenda, 21:01
Re: [TenTec] TT equipment for sale, Jim Keasey, 20:23
[TenTec] 1209, ROD, 20:14
Re: [TenTec] TT equipment for sale, Nathan Moreschi, 20:07
Re: [TenTec] Jupiter Molex to Power Poles conversion, Fernando, 16:54
Re: [TenTec] Jupiter Molex to Power Poles conversion, Denton, 14:16
[TenTec] Jupiter Molex to Power Poles conversion, Fernando, 14:09
[TenTec] TT equipment for sale, Phil Parrish, 13:36
Re: [TenTec] ....again, Gary....you would be happy with my OPENED UP #538 Jupiter, al sirois, 09:21
Re: [TenTec] Looking for a 238c.....sugfgest you look at my ADD for a #229-B ., al sirois, 08:50
Re: [TenTec] Looking for a 238c, Ken Simpson, W8EK, 04:43
Re: [TenTec] Adding Power Poles to an Orion, Denton, 00:20

October 24, 2010

Re: [TenTec] Adding Power Poles to an Orion, Fernando, 23:39
Re: [TenTec] Adding Power Poles to an Orion, ac5aa1, 23:34
Re: [TenTec] Adding Power Poles to an Orion, Fernando, 23:30
[TenTec] Looking for a 238c, John Molenda, 22:44
Re: [TenTec] Adding Power Poles to an Orion, Duane Calvin, 22:09
Re: [TenTec] Adding Power Poles to an Orion, Denton, 20:45
Re: [TenTec] Paragon II / Other Opinions, CSM(r) Gary Huber, 18:27
Re: [TenTec] Paragon II / Other Opinions......I can spare one of my MARS Jupiter's for you., al sirois, 18:04
[TenTec] Emailing: P1030658, P1030659, Ten-Tec #229-B, 2KW, roller inductor TUNER, $265.-, al sirois, 17:29
Re: [TenTec] [Fwd: Re: Adding Power Poles to an Orion], Fernando, 17:00
[TenTec] [Fwd: Re: Adding Power Poles to an Orion], Peter Frenning, 15:58
Re: [TenTec] Paragon II / Other Opinions, Edward Feustel, 15:55
[TenTec] Adding Power Poles to an Orion, Fernando, 15:15
Re: [TenTec] Any hope for broken Scout 20M module??, Richards, 15:11
Re: [TenTec] Century 21 FS, W8BVH, 13:40
[TenTec] Century 21 FS, Ralph Matheny K8RYU, 11:00
[TenTec] TT Orion 2 mods, Peter Frenning, 06:57

October 23, 2010

Re: [TenTec] ...the box to do the RF switching....at the PL-259., al sirois, 16:55
Re: [TenTec] Orion I Display Question, AL7CR, 13:53
Re: [TenTec] Orion I Display Question, John Frazier, 13:52
Re: [TenTec] Eagle on TB.....Who sells a box to do the switching with the keying?, Rick - NJ0IP / DJ0IP, 13:46
[TenTec] Paragon II / Other Opinions, K8JDC, 13:27
Re: [TenTec] Orion I Display Question, Phil Chambley Sr., 13:26
Re: [TenTec] Orion I Display Question, N4PY2, 13:19
[TenTec] Orion I Display Question, AL7CR, 13:09

October 22, 2010

Re: [TenTec] scout.....I could sell you a complete set of Modules. ( It will become a collectors item), al sirois, 20:19
Re: [TenTec] Eagle on TB.....Who sells a box to do the switching with the keying?, al sirois, 20:13
Re: [TenTec] For Sale: Orion, 307 Speaker, Century 21, 1315 15M QRP CW Xcvr, Tony Dangelo, 18:41
[TenTec] For Sale: Orion, 307 Speaker, Century 21, 1315 15M QRP CW Xcvr, D Michael, 18:08
Re: [TenTec] Eagle on TB, Rick - NJ0IP / DJ0IP, 16:24
[TenTec] Eagle guts ?, able2fly, 15:54
[TenTec] Eagle on TB, Petr Ourednik, 15:35
[TenTec] Eagle Reviews, Art Trampler, 14:56
Re: [TenTec] Any hope for broken Scout 20M module??, Louis Ciotti, 13:02
Re: [TenTec] Any hope for broken Scout 20M module??, David Goncalves, 12:56

October 21, 2010

Re: [TenTec] Any hope for TenTec Scout module?, Steve Berg, 23:10
[TenTec] 705 Microphone, David and Dianne on Comcast, 23:05
Re: [TenTec] Any hope for TenTec Scout module?, Dr. Gerald N. Johnson, 22:52
[TenTec] Any hope for TenTec Scout module?, Daniel Basnett, 22:18
Re: [TenTec] Any hope for TenTec Scout module? More, Dr. Gerald N. Johnson, 21:08
Re: [TenTec] Any hope for TenTec Scout module?, Dr. Gerald N. Johnson, 20:48
Re: [TenTec] Any hope for TenTec Scout module?, Stuart Rohre, 20:42
[TenTec] Any hope for TenTec Scout module?, Daniel Basnett, 20:27
[TenTec] Any hope for broken Scout 20M module??, Daniel Basnett, 20:18
Re: [TenTec] TenTec Digest, Vol 94, Issue 24, wilbert a musselman, 09:57
Re: [TenTec] Eagle CW/Notch Question, Rick - NJ0IP / DJ0IP, 01:11

October 20, 2010

[TenTec] Eagle CW/Notch Question, Art Trampler, 22:45
[TenTec] Omni VII compared, Curt, 05:57

October 19, 2010

Re: [TenTec] Eagle vs. 1000D, Rick - NJ0IP / DJ0IP, 11:36
Re: [TenTec] Eagle vs. 1000D, Barry N1EU, 08:50
[TenTec] Eagle vs. 1000D, Dave Edwards, 08:40
[TenTec] Eagle, Jliving39, 03:47
Re: [TenTec] eagle, Ken Brown, 01:45
Re: [TenTec] eagle, Rick - NJ0IP / DJ0IP, 01:16

October 18, 2010

Re: [TenTec] F/S Tne Tec Orion II Model 566......Very good, but it doesn't do MARS, Bwana Bob, 22:02
Re: [TenTec] eagle, Carl Winkles, 21:39
Re: [TenTec] eagle, ROD, 18:40
Re: [TenTec] eagle, N4PY2, 18:34
Re: [TenTec] eagle, ROD, 18:19
Re: [TenTec] eagle, Rick - NJ0IP / DJ0IP, 17:41
[TenTec] FS: 9mhz 1.8 khz filter, Nathan Moreschi, 17:00
Re: [TenTec] eagle, ROD, 16:58
Re: [TenTec] eagle, Rick - NJ0IP / DJ0IP, 16:26
Re: [TenTec] eagle, WA3FIY, 15:41
Re: [TenTec] eagle, Jeramy Ross, 15:35
Re: [TenTec] eagle, Steve Berg, 15:28
[TenTec] eagle, Paul DeWitte, 15:20

October 17, 2010

[TenTec] FS: 307 speaker - 709 mic and stand, Jerry Kitterman, 16:38
Re: [TenTec] ac hum on OMNI V, k3miy, 08:23
[TenTec] ac hum on OMNI V, scott sheppard, 00:53

October 16, 2010

Re: [TenTec] Orion resets at every power up, Arthur Lewis, 14:33
[TenTec] FOR SALE: TenTec OMNI-6-OPT-III, #563, $1050.-, al sirois, 14:00
Re: [TenTec] Orion resets at every power up, Martin Sole, 13:42
Re: [TenTec] Orion resets at every power up, Martin Sole, 13:28
[TenTec] Orion resets at every power up, Alan Sewell N5NA, 13:22
Re: [TenTec] Orion resets at every power up, Rick W, 13:20
Re: [TenTec] Orion 565 serial port failure (Again!), Martin Sole, 13:09
[TenTec] v.9 question/ssb filter, Ralph Matheny K8RYU, 12:28
[TenTec] FS: Omni VI Plus (Model 564), Jack Mandelman, K1VT, 12:10
Re: [TenTec] Orion resets at every power up, Martin Sole, 12:05
Re: [TenTec] Orion resets at every power up, John T. Fleming, 11:53
Re: [TenTec] Orion resets at every power up, Martin Sole, 11:53
Re: [TenTec] Orion resets at every power up, Dr. Gerald N. Johnson, 11:45
Re: [TenTec] Orion resets at every power up, Rick W, 11:38
Re: [TenTec] Orion resets at every power up, N4PY2, 11:38
Re: [TenTec] Orion resets at every power up, Martin Sole, 11:33
Re: [TenTec] Orion resets at every power up, Martin Sole, 11:30
Re: [TenTec] Orion resets at every power up, Martin Sole, 11:19
Re: [TenTec] Orion resets at every power up, N4PY2, 11:08
Re: [TenTec] Orion resets at every power up, ROD, 10:56
Re: [TenTec] Orion resets at every power up, Martin Sole, 10:44
Re: [TenTec] Orion resets at every power up, N4PY2, 10:13
Re: [TenTec] Orion resets at every power up, Martin Sole, 10:06
Re: [TenTec] Comparison of Ten Tec Orion II with Flex 500A, RM, 09:05
Re: [TenTec] Orion resets at every power up, N4PY2, 08:10
[TenTec] For Sale: Orion, 307 Speaker, 1315 15M QRP CW Xcvr, D Michael, 07:55
[TenTec] Orion resets at every power up, Martin Sole, 02:10

October 15, 2010

Re: [TenTec] Orion 565 serial port failure (Again!), Ken Shutt, 18:04
Re: [TenTec] now that the eagle has landed?, pfizenmayer, 17:29
Re: [TenTec] Orion 565 serial port failure (Again!), Barry N1EU, 07:41
[TenTec] Mass Trade - Need to reduce shack size ASAP, Jeramy Ross, 03:16
Re: [TenTec] Orion 565 serial port failure (Again!), Richards, 02:42
Re: [TenTec] now that the eagle has landed?, Richards, 02:41

October 14, 2010

Re: [TenTec] Orion 565 serial port failure (Again!), Martin Sole, 23:48
Re: [TenTec] now that the eagle has landed?, N4PY2, 22:59
Re: [TenTec] now that the eagle has landed?, Dave Humbertson, 21:40
[TenTec] now that the eagle has landed?, mike bryce, 20:34
Re: [TenTec] Comparison of Ten Tec Orion II with Flex 500A, Stuart Rohre, 18:07
Re: [TenTec] Comparison of Ten Tec Orion II with Flex 500A, Barry N1EU, 17:05
Re: [TenTec] Comparison of Ten Tec Orion II with Flex 500A, David W LeJeune, Sr, 17:04
Re: [TenTec] Comparison of Ten Tec Orion II with Flex 500A, David W LeJeune, Sr, 16:57
Re: [TenTec] Comparison of Ten Tec Orion II with Flex 500A, Duane Calvin, 16:41
Re: [TenTec] Comparison of Ten Tec Orion II with Flex 500A, N4PY2, 16:37
Re: [TenTec] Comparison of Ten Tec Orion II with Flex 500A, Richards, 16:36
Re: [TenTec] Comparison of Ten Tec Orion II with Flex 500A, Frank Kirschner, 16:31
Re: [TenTec] Orion and Heil Proset QuietPhone Solution, Richards, 15:41
Re: [TenTec] Orion 565 serial port failure (Again!), Richards, 15:24
Re: [TenTec] Comparison of Ten Tec Orion II with Flex 500A, Martin Ewing, 15:09
Re: [TenTec] Comparison of Ten Tec Orion II with Flex 500A, N4PY2, 15:02
[TenTec] Orion and Heil Proset QuietPhone Solution, AL7CR, 14:55
[TenTec] Comparison of Ten Tec Orion II with Flex 500A, Frank Kirschner, 14:50
[TenTec] Orion 565 serial port failure (Again!), Martin Sole, 12:35
[TenTec] Orion 565 serial port failure (Again!), Martin Sole, 12:34
Re: [TenTec] 28.5 band switch on Omni D, Dennis Jones, 11:45
Re: [TenTec] 28.5 band switch on Omni D, David Goncalves, 09:50
Re: [TenTec] Another Eagle has landed, doug, 08:00
Re: [TenTec] .....Very good, but it doesn't do MARS, al sirois, 04:24
Re: [TenTec] 28.5 band switch on Omni D, Dennis Jones, 02:58
Re: [TenTec] Proset Quiet Phone vs TenTec 777 with the Orion I, Richards, 01:26
Re: [TenTec] Another Eagle has landed, Richards, 01:18
Re: [TenTec] F/S Tne Tec Orion II Model 566......Very good, but it doesn't do MARS, w8au, 00:26

October 13, 2010

[TenTec] Another Eagle has landed, doug, 21:22
Re: [TenTec] F/S Tne Tec Orion II Model 566......Very good, but it doesn't do MARS, Bwana Bob, 18:19
Re: [TenTec] Proset Quiet Phone vs TenTec 777 with the Orion I, Stuart Rohre, 17:05
Re: [TenTec] TenTec 1260 6 meter FM transceiver and at general coverage receiver, David Goncalves, 13:49
[TenTec] TenTec 1260 6 meter FM transceiver and at general coverage receiver, William Quigley, 13:28
Re: [TenTec] Is The Eagle really soaring yet?., Dr. Gerald N. Johnson, 11:37
Re: [TenTec] Is The Eagle really soaring yet?., Rick - NJ0IP / DJ0IP, 11:29
Re: [TenTec] Proset Quiet Phone vs TenTec 777 with the Orion I, John T. Fleming, 09:33
Re: [TenTec] Is The Eagle really soaring yet?., Walt Amos, 03:53
Re: [TenTec] Proset Quiet Phone vs TenTec 777 with the Orion I, Dr. Gerald N. Johnson, 00:08

October 12, 2010

Re: [TenTec] Proset Quiet Phone vs TenTec 777 with the Orion I, mcelmer1, 23:56
[TenTec] Proset Quiet Phone vs TenTec 777 with the Orion I, AL7CR, 23:26
Re: [TenTec] Is The Eagle really soaring yet?., Dr. Gerald N. Johnson, 21:03
Re: [TenTec] Is The Eagle really soaring yet?., Richards, 20:28
[TenTec] TenTec 1260 6 meter FM transceiver and a general coverage receiver., William Quigley, 20:25
Re: [TenTec] Is The Eagle really soaring yet?., Richards, 20:16
Re: [TenTec] Is The Eagle really soaring yet?., Rick - NJ0IP / DJ0IP, 20:15
Re: [TenTec] Is The Eagle really soaring yet?., Rick - NJ0IP / DJ0IP, 20:09
[TenTec] TenTec 1260 6 meter FM transceiver and a general coverage receiver, William Quigley, 19:48
Re: [TenTec] F/S Tne Tec Orion II Model 566......Very good, but it doesn't do MARS, al sirois, 19:32
Re: [TenTec] Is The Eagle really soaring yet?., Dr. Gerald N. Johnson, 19:20
Re: [TenTec] Is The Eagle really soaring yet?., David Goncalves, 18:48
Re: [TenTec] Is The Eagle really soaring yet?., Barry N1EU, 18:39
Re: [TenTec] F/S Tne Tec Orion II Model 566, Fernando, 18:17
Re: [TenTec] F/S Tne Tec Orion II Model 566, Dr. Gerald N. Johnson, 17:09
Re: [TenTec] F/S Tne Tec Orion II Model 566, Richards, 17:02
Re: [TenTec] Is The Eagle really soaring yet?., Richards, 16:50
Re: [TenTec] 28.5 band segment on Omni D, Steve Mercure, 16:41
Re: [TenTec] 28.5 band segment on Omni D, Kevin Anderson, 16:15
[TenTec] F/S Tne Tec Orion II Model 566, Bill Gaines AD8P, 16:13
Re: [TenTec] 28.5 band segment on Omni D, Dr. Gerald N. Johnson, 13:44
Re: [TenTec] 28.5 band segment on Omni D, Ivin Flint, 13:38
[TenTec] TenTec 6 mtr FM transceiver, William Quigley, 12:51
Re: [TenTec] 28.5 band segment on Omni D, Dr. Gerald N. Johnson, 10:50
[TenTec] 28.5 band segment on Omni D, Harry Coates, 10:38
[TenTec] FS: OMNI VII, Myron Cherry, 10:01

October 11, 2010

Re: [TenTec] Any Advice for a 580 Delta owner?, Henry Mackey, 20:45
Re: [TenTec] Any Advice for a 580 Delta owner?, Stuart Rohre, 17:10

October 10, 2010

Re: [TenTec] 28.5 band switch on Omni D, Ivin Flint, 18:01
Re: [TenTec] 28.5 band switch on Omni D, David Goncalves, 16:10
Re: [TenTec] 28.5 band switch on Omni D, N4PY2, 16:05
[TenTec] 28.5 band switch on Omni D, Ivin Flint, 16:02
[TenTec] FS: CW Filter, Myron Cherry, 10:54
[TenTec] looking for a Corsair II, IV3YNB op. Matteo, 09:01
Re: [TenTec] Argosy, KEN RINDFLEISCH, 00:11

October 09, 2010

[TenTec] Orion 565 updates, John Molenda, 22:45
Re: [TenTec] Argosy, John Graves, 19:22
Re: [TenTec] Any Advice for a 580 Delta owner?, Bob Good, 13:57
[TenTec] Argosy, KEN RINDFLEISCH, 13:40
Re: [TenTec] For Sale, John Molenda, 11:56
[TenTec] FS: Ten Tec Mobile Mount, Myron Cherry, 11:47
Re: [TenTec] For Sale: Orion, 307 Speaker, 1315 15M QRP CW Xcvr, John Molenda, 11:45
Re: [TenTec] For Sale, Dr. Gerald N. Johnson, 10:24
[TenTec] For Sale: Orion, 307 Speaker, 1315 15M QRP CW Xcvr, D Michael, 08:23
[TenTec] For Sale, Jliving39, 04:09
Re: [TenTec] Any Advice for a 580 Delta owner?, Mike Hyder -N4NT-, 02:14
[TenTec] Corsair II, Malcolm McLeman, 01:34
[TenTec] Any Advice for a 580 Delta owner?, KC2RPJ, 00:20
[TenTec] Advice for a 580 Delta owner?, David Hartman, 00:08

October 08, 2010

Re: [TenTec] Is The Eagle really soaring yet?., doug, 17:56
[TenTec] Is The Eagle really soaring yet?., able2fly, 17:46
Re: [TenTec] The Eagle is soaring., doug, 17:44
[TenTec] The Eagle is soaring., Henry, John, 14:53
Re: [TenTec] (no subject), Jim Younce, 13:42
[TenTec] Omni VII RSGB Review, Bill Mellema, 09:43
[TenTec] (no subject), Smileywb4, 07:12

October 07, 2010

Re: [TenTec] Century 21 Analog Question..., Mike Hyder -N4NT-, 23:27
Re: [TenTec] Omni VI on the fritz, K7wpz, 18:41
[TenTec] Century 21 info; Thanks a Million!!!, Matt Dillon, 16:34
Re: [TenTec] Century 21 Analog Question..., KC1DI, 15:09
Re: [TenTec] Century 21 Analog Question..., Dr. Gerald N. Johnson, 13:57
Re: [TenTec] Century 21 Analog Question..., Dr. Gerald N. Johnson, 13:55
[TenTec] Pre/Attn on Omni VII?, Tim Cook, 13:47
Re: [TenTec] Century 21 Analog Question..., Jim Younce, 13:08
Re: [TenTec] Century 21 Analog Question..., geoffrey mendelson, 12:55
Re: [TenTec] Century 21 Analog Question..., Mike Hyder -N4NT-, 12:47
Re: [TenTec] Century 21 Analog Question..., Dr. Gerald N. Johnson, 12:41
Re: [TenTec] Century 21 Analog Question..., mike bryce, 12:06
[TenTec] Century 21 Analog Question..., Matt Dillon, 11:52
Re: [TenTec] Ten-Tec Keyers/Paddles, Larry L. Laflamme, 09:19

October 06, 2010

[TenTec] FS: ORION 565, k1zn, 17:04
Re: [TenTec] Corsair II Amplifier Relay, Stuart Rohre, 16:12
Re: [TenTec] Corsair II Amplifier Relay, N4PY, 08:41
Re: [TenTec] Corsair II Amplifier Relay, Dr. Gerald N. Johnson, 00:16
Re: [TenTec] Corsair II Amplifier Relay, Phil Chambley Sr., 00:14

October 05, 2010

[TenTec] Corsair II Amplifier Relay, Patrick, 23:06
[TenTec] 238A is SOLD....Many thanks to all who replied!, John, 23:03
Re: [TenTec] 238A parts tuner...., K2RS, 22:35
Re: [TenTec] 238A parts tuner...., John, 22:26
Re: [TenTec] 238A parts tuner...., K2RS, 22:23
[TenTec] Omni VI on fritz, Roger Rippy, 20:45
Re: [TenTec] 238A parts tuner...., pfizenmayer, 20:33
Re: [TenTec] 238A parts tuner...., JOHN, 20:27
Re: [TenTec] 238A parts tuner...., John, 20:07
Re: [TenTec] 238A parts tuner...., JOHN, 19:51
Re: [TenTec] Omni VI on the fritz, Dr. Gerald N. Johnson, 18:44
Re: [TenTec] Omni VI on the fritz, Joe Roberts, 18:17
[TenTec] Omni VI on the fritz, Roger Rippy, 18:07
[TenTec] Filter For Sale, Nathan Moreschi, 18:00
[TenTec] And....my email address is....., John, 17:44
[TenTec] 238A parts tuner...., John, 17:38
Re: [TenTec] Titan 425 Meter lamps?, Dr. Gerald N. Johnson, 15:25
Re: [TenTec] Titan 425 Meter lamps?, Jim Brown, 14:22
Re: [TenTec] Wanted: TT Herc II, Jim Brown, 14:15
[TenTec] Wanted: TT Herc II, Allan Taylor, 11:30

October 04, 2010

Re: [TenTec] Wanted - Cheap/Broken Pegasus, Walt Amos, 08:53
[TenTec] Wanted - Cheap/Broken Pegasus, John Huffman, 08:27
[TenTec] Auto Tuners, Roger Rippy, 08:00
Re: [TenTec] Auto Tuners, Frank Kirschner, 07:47
Re: [TenTec] Auto Tuners, Vic Klein, 07:08

October 03, 2010

[TenTec] Ten-Tec Keyers/Paddles, Gary H. Harmon, Jr., 23:19
Re: [TenTec] Auto Tuners, BOB@W2PNJ, 23:14
Re: [TenTec] Auto Tuners, Richards, 21:49
Re: [TenTec] TenTec radios for sale - Will be at Howard County MD hamfest.on 10/3, Michael Trowbridge, 21:32
Re: [TenTec] Auto Tuners, Dr. Gerald N. Johnson, 21:00
Re: [TenTec] Eagle A few answers.....Thanks John, Good info.!, Steve Thorne, 19:53
[TenTec] Auto Tuners, Roger Rippy, 19:50
Re: [TenTec] Ten-Tec timeline question...My #277 is dated 12-20-77 (IOM & Schematic), al sirois, 15:27
Re: [TenTec] FS: Jupiter and Power Supply, David Goncalves, 13:14
Re: [TenTec] Electric horse fence, Bwana Bob, 10:36
Re: [TenTec] Auto Tuners, Vic Klein, 08:40
[TenTec] Ten-Tec timeline question, robert johnston, 08:26
Re: [TenTec] Ten-Tec Eagle 599, Rick W, 00:37
Re: [TenTec] Eagle, Ken Brown, 00:24

October 02, 2010

Re: [TenTec] Eagle, Rick - NJ0IP / DJ0IP, 23:56
Re: [TenTec] Eagle, CSM(r) Gary Huber, 23:39
[TenTec] Eagle, Ken Brown, 23:00
Re: [TenTec] Ten-Tec Eagle 599, Walt Amos, 22:35
Re: [TenTec] Titan 425 Meter lamps?, CSM(r) Gary Huber, 22:27
Re: [TenTec] Titan 425 Meter lamps?, Dr. Gerald N. Johnson, 21:24
Re: [TenTec] Titan 425 Meter lamps?, John Oglesby, 20:46
Re: [TenTec] Titan 425 Meter lamps?, CSM(r) Gary Huber, 20:31
Re: [TenTec] Ten-Tec Eagle 599, CSM(r) Gary Huber, 20:06
Re: [TenTec] Wanted: Ten Tec 645 or KR50 keyer, CSM(r) Gary Huber, 19:58
[TenTec] For Sale: Orion, 307 Speaker, 1315 15M QRP CW Xcvr, D Michael, 19:18
Re: [TenTec] Titan 425 Meter lamps?, geoffrey mendelson, 19:13
Re: [TenTec] Titan 425 Meter lamps?, Dr. Gerald N. Johnson, 18:59
[TenTec] TenTec radios for sale - Will be at Howard County MD hamfest.on 10/3, Michael Trowbridge, 18:39
Re: [TenTec] Titan 425 Meter lamps?, Dr. Gerald N. Johnson, 18:36
Re: [TenTec] Titan 425 Meter lamps?, Ken Brown, 17:42
Re: [TenTec] Auto Tuners, Frank Kirschner, 17:41
Re: [TenTec] Ten-Tec Eagle 599 RCA connectors, Ray Sills, 17:37
Re: [TenTec] Omni V.9, Frank Kirschner, 17:37
[TenTec] Titan 425 Meter lamps?, John Oglesby, 16:06
Re: [TenTec] Ten-Tec Eagle 599, Paul Christensen, 15:52
[TenTec] Ten-Tec Eagle 599, N7QS, 14:51
[TenTec] Eagle, Roy, 12:52
[TenTec] Auto Tuners, Phil & Debbie Salas, 12:40
Re: [TenTec] Eagle - mobile?, doug, 12:37
[TenTec] FS: TT-238 Tuner, Art Trampler, 12:35
[TenTec] Eagle - mobile?, Bill Acito, 12:19
Re: [TenTec] Auto Tuners, Steve Berg, 12:10
Re: [TenTec] 238 Tuner, 962 PS For sale, John Molenda, 11:35
[TenTec] 238 Tuner, 962 PS For sale, Art Trampler, 11:19
Re: [TenTec] Omni VII, John Molenda, 10:09
Re: [TenTec] Auto Tuners, Dan Mees, 09:57
[TenTec] Auto Tuners, Roger Rippy, 09:49
Re: [TenTec] Auto Tuners, Rick - NJ0IP / DJ0IP, 09:32
Re: [TenTec] Auto Tuners, Dave Edwards, 09:15
[TenTec] Auto Tuners, Roger Rippy, 08:43
Re: [TenTec] Omni VII, N4PY2, 08:01

October 01, 2010

[TenTec] Wanted: Ten Tec 645 or KR50 keyer, robert johnston, 23:46
Re: [TenTec] Omni VII, Richards, 23:42
[TenTec] FS: Omni VI, Option 3, 962 PS, TT 238 (original) tuner, Art Trampler, 23:01
Re: [TenTec] Ironically the Eagle has the same model number as . . ., Rick - NJ0IP / DJ0IP, 21:47
Re: [TenTec] Ironically the Eagle has the same model number as . . ., k3miy, 21:09
Re: [TenTec] Omni VII, John Molenda, 19:37
Re: [TenTec] Ironically the Eagle has the same model number as . . ., Art Trampler, 17:48
Re: [TenTec] Omni VI+ sharp?, Barry N1EU, 17:48
Re: [TenTec] Omni VII, CSM(r) Gary Huber, 17:42
Re: [TenTec] Omni VI+ sharp?, Rick - NJ0IP / DJ0IP, 17:39
[TenTec] Omni VI+ sharp?, Dave Edwards, 17:31
[TenTec] Ironically the Eagle has the same model number as . . ., Rick - NJ0IP / DJ0IP, 17:31
Re: [TenTec] Eagle ... receiver ... transmitter ... buttons ... knobs., Troy W6HV, 15:55
[TenTec] Omni V.9, David & Chris Drake, 15:28
Re: [TenTec] Omni VII, John Molenda, 15:12
Re: [TenTec] Omni VII, CSM(r) Gary Huber, 15:02
Re: [TenTec] Replacement Keypad for Omni V.9, John Molenda, 14:53
Re: [TenTec] Replacement Keypad for Omni V.9, k8bbm, 14:43
Re: [TenTec] Omni VII, N4PY2, 14:26
[TenTec] Omni VII, John Molenda, 13:48
[TenTec] Eagle PS Question, Art Trampler, 13:27
Re: [TenTec] Eagle ... receiver ... transmitter ... buttons ... knobs., Rick - NJ0IP / DJ0IP, 12:52
Re: [TenTec] Eagle vfo bandwidth?, CSM(r) Gary Huber, 12:47
Re: [TenTec] Eagle A few answers.....Thanks John, Good info.!, al sirois, 12:37
[TenTec] Replacement Keypad for Omni V.9, Frank Kirschner, 10:39
Re: [TenTec] Eagle A few answers, Art Trampler, 09:31
Re: [TenTec] Eagle A few answers, CSM(r) Gary Huber, 09:23
Re: [TenTec] Eagle vfo bandwidth?, Barry N1EU, 09:15
[TenTec] Eagle A few answers, Henry, John, 08:58
Re: [TenTec] Eagle vfo bandwidth?, al sirois, 07:32
[TenTec] Eagle vfo bandwidth?, Tim Cook, 07:18