Tentec can probably supply a replacement crystal. If not International
Crystal Manufacturing or some other crystal maker surely can. What is
the frequency of the crystal? Sometimes you can find suitable crystals
in lists made for computer applications at places like Mouser
(www.mouser.com) and digi-key (www.digikey.com). Last I looked a couple
days ago there were Scout modules on epay. There's a slight chance of
soldering the lead back to the crystal, but they usually break flush to
the case and the strength of that is very small.
The crystal frequency should be stamped on the end of the crystal.
73, Jerry, K0CQ
On 10/21/2010 7:27 PM, Daniel Basnett wrote:
I recently bought a used Scout and when checking out the 20m module, I found
the it was intermittent. Sometimes it worked and sometimes not. I opened
the case and when carefully inspecting it I found that the crystal was bent
all the way over and one of the leads was loose and practically broken.
Well, as soon as I touched it the lead broke completely. Now the module
always causes the Scout display to show 142.0 indicating a module that is
not installed correctly. My question - could I find a replacement for the
crystal and replace it or should I just find replacement module? Thanks for
any thoughts??
|