TenTec
[Top] [All Lists]
<prev [Date] next>
[Advanced]
 <prev [Thread] next>

Re: [TenTec] 4229 Tuner Balun Replacement?

from [Jim Brown] [Permanent Link][Original]
To: tentec@contesting.com
Subject: Re: [TenTec] 4229 Tuner Balun Replacement?
From: Jim Brown <k9yc@audiosystemsgroup.com>
Reply-to: k9yc@arrl.net, Discussion of Ten-Tec Equipment <tentec@contesting.com>
Date: Mon, 15 Nov 2010 11:43:12 -0800
List-post: <tentec@contesting.com">mailto:tentec@contesting.com> 
On 11/15/2010 6:34 AM, Don Jones wrote:
> I would be more interested in actual measurements than theoretical
> calculations.

http://audiosystemsgroup.com/RFI-Ham.pdf   contains a LOT of measured data.

73, Jim K9YC
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
[More with this subject...]
<Prev in Thread] Current Thread [Next in Thread>
Previous by Date:  Re: [TenTec] 4229 Tuner Balun Replacement?, Don Jones
Next by Date:  Re: [TenTec] 4229 Tuner Balun Replacement?, Jim Brown
Previous by Thread:  Re: [TenTec] 4229 Tuner Balun Replacement?, Jim Brown
Next by Thread:  Re: [TenTec] 4229 Tuner Balun Replacement?, Dr. Gerald N. Johnson
Indexes:  [Date] [Thread] [Top] [All Lists]