TenTec
[Top] [All Lists]

Re: [TenTec] New Eagle - but odd sounding audio nosie

To: "'Discussion of Ten-Tec Equipment'" <tentec@contesting.com>
Subject: Re: [TenTec] New Eagle - but odd sounding audio nosie
From: "Duane Calvin" <ac5aa1@gmail.com>
Reply-to: ac5aa@ac5aa.com, Discussion of Ten-Tec Equipment <tentec@contesting.com>
Date: Thu, 3 Feb 2011 09:30:04 -0600
List-post: <tentec@contesting.com">mailto:tentec@contesting.com>
Yep, time to give the techs at Ten-Tec a ringy-dingy . . .

        73, Duane

Duane Calvin, AC5AA
Austin, Texas
www.ac5aa.com  
 

-----Original Message-----
From: tentec-bounces@contesting.com [mailto:tentec-bounces@contesting.com]
On Behalf Of Thomas
Sent: Thursday, February 03, 2011 9:25 AM
To: tentec@contesting.com
Subject: [TenTec] New Eagle - but odd sounding audio nosie

Hi,

Well I took the plunge and bought a new Eagle. Wow, what a nice package and
thoughtful ergonomics. However, I am concerned about something I am hearing.

Right from the moment I turned it on the audio sounded raspy to me. I
adjusted the pass band tuning and filter bandwidth but I can't say that
helped improve it. The more I listened to signals, primarily CW, the more I
became concerned that something isn't right. I hear a raspiness that
accompanies the signal I am listening to. It is a hiss-like noise that keys
with the CW tone of the station I am copying. Last night I tried to pass it
off due to inexperience with the radio's settings.

This morning there was a huge pile-up on 40m CW calling a DX station (maybe
VP8) and the raspiness was readily evident. The pre-amp was off and I tried
adjusting the bandwidth and pass band controls to clean the signals up. The
pile-up sounded like a confused, jumbled up mess full of the raspy noise I
described. The DX station sounded clean and distinct but the pile-up sounded
terrible. My K2 sitting side-by-side with the Eagle sounded clean and crisp
handling the pile-up.

I reviewed the factory check-off list that accompanied the radio and the
technician certified all the tests. This is my first IF DSP radio and don't
know if this is how they typically sound. It is radically different than the
analog radios that I am used to. Any thoughts on what is going on is
appreciated?

Thanks, Thomas
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec

_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec

<Prev in Thread] Current Thread [Next in Thread>