TenTec
[Top] [All Lists]

Re: [TenTec] 253 Tuner Interface Cable/System Needed

To: tentec@contesting.com
Subject: Re: [TenTec] 253 Tuner Interface Cable/System Needed
From: Jim Brown <k9yc@audiosystemsgroup.com>
Reply-to: k9yc@arrl.net, Discussion of Ten-Tec Equipment <tentec@contesting.com>
Date: Wed, 09 Mar 2011 11:41:19 -0800
List-post: <tentec@contesting.com">mailto:tentec@contesting.com>
On 3/7/2011 7:02 PM, Brickey, Dennis wrote:
> I need a cable for interfacing a 253 tuner to an Omni VI.  That would be a 
> 236 cable
>
> or
>
> I am in need of an interface system for the 253 tuner and an Orion.

1) Buy connectors from an industrial supply house, buy wire from Home 
Depot or Lowe's (or a hamfest), and you're in business.

2) Pull out the schematics and see what pin goes to what.

3) Fire up your soldering iron.

73, Jim K9YC
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec

<Prev in Thread] Current Thread [Next in Thread>