Hello
I'd be interested in seeing a photo or two if you have some.
Electrically, things could be fixed but
cosmetically I'm challenged.
tnx Fernando N2FQ/6
On Apr 28, 2011, at 6:33 PM, Nathan Moreschi wrote:
> Ten Tec Corsair I For Sale
>
> This Corsair is functional but has one known issue when selecting
> filters. When in CW mode, the RX is dead when in the third position.
> There is an issue with the switch (it is not a filter issue). The
> fix is
> to switch to position 2 which has an Inrad 400hz filter in it. The
> third
> position is the wide position when the 2.4 khz filter is in use. In
> sideband, the 3rd position works but position 2 does not work. The
> first
> position does work.
>
> This is a decent radio despite the above condition. In addition, there
> is a RX antenna mod that takes advantage of the pre-drilled hole
> provided on all Corsairs. It works just like RX antenna inputs do for
> most ICOM radios with a simple loop connected with a jumper. You will
> need a DPDT switch of your own to take advantage of this.
>
> No manual, mic or power cord. Sale only includes the radio and the
> Inrad
> filter.
>
> Make offer for price or possible trade. Pics on request.
>
> 73,
>
> Nate/N4YDU
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|