Let me know on the price, The rig I have for trade is a Omni D which very well,
front panal worn but its a plug and play. 73 Jim N7INO
--- On Fri, 4/29/11, Fernando<n2fq@sbcglobal.net> wrote:
From: Fernando<n2fq@sbcglobal.net>
Subject: Re: [TenTec] Corsair I For Sale or Trade
To: "Discussion of Ten-Tec Equipment"<tentec@contesting.com>
Date: Friday, April 29, 2011, 2:33 AM
Hello
I'd be interested in seeing a photo or two if you have some.
Electrically, things could be fixed but
cosmetically I'm challenged.
tnx Fernando N2FQ/6
On Apr 28, 2011, at 6:33 PM, Nathan Moreschi wrote:
Ten Tec Corsair I For Sale
This Corsair is functional but has one known issue when selecting
filters. When in CW mode, the RX is dead when in the third position.
There is an issue with the switch (it is not a filter issue). The
fix is
to switch to position 2 which has an Inrad 400hz filter in it. The
third
position is the wide position when the 2.4 khz filter is in use. In
sideband, the 3rd position works but position 2 does not work. The
first
position does work.
This is a decent radio despite the above condition. In addition, there
is a RX antenna mod that takes advantage of the pre-drilled hole
provided on all Corsairs. It works just like RX antenna inputs do for
most ICOM radios with a simple loop connected with a jumper. You will
need a DPDT switch of your own to take advantage of this.
No manual, mic or power cord. Sale only includes the radio and the
Inrad
filter.
Make offer for price or possible trade. Pics on request.
73,
Nate/N4YDU
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec